DNA Papst

I am finding the following error in the current firmware: If i unscrew my atomizer which had been running in replay mode, and screw on a new one then it seems to throw out a temp protect error below the replay menu. Only way to fix this issue I have found is to take out my batteries or change into another profil. This has happened 3 times so far. i use flat clapton ss316l with 0,14 ohm . As far as EScribe goes what does the PK mode do and what exactly is it used for in Replay?

you must wait for 75c firmware.i have the paranormal dna250c with replay, and i see in escribe no replay screen two.but it works,and i think the screen is on chip at the moment

its a pre sample

My Paranormal 250C Great Mod and replay is so genius!

Here you can download it ;-) http://www.dna200.de/?page_id=67

Vapcige have posting: DNA250C. 2 battery to 200W. 3 battery to 300W. 4 battery to 400W. How do you think 2,3,4 batteries?

Here now better pictures from the mod. and Mooch have an new statement about the problem: Mooch WARNING: I recommend not using your HCigar VT75C...at all. I posted earlier (now deleted) about HCigar's warning not to use 26650's that were "too long", i.e., ones they didn't bother to test the device with. I recommended only using shorter 26650's and mentioned a few that I measured as being shorter than most. I've thought about it some more and have decided that I must recommend not using this device at all. Using a 26650 that is "too long" can lead to a short-circuiting of the battery, possibly causing it to burst. This is an unacceptable design flaw followed by completely inadequate testing by HCigar. What kind of company doesn't try out a variety of 26650's when creating a 26650 mod? Here's HCigar's statement regarding this problem: https://imgur.com/a/aK2q0 Some posts and a video about this problem, posted to my previous thread... From Milen Cholaski: https://forum.evolvapor.com/topic/68961-vtc-75c-warning/ From Milen Cholaski: https://www.youtube.com/watch?v=CH2bVu_YUL0 Not knowing what length any 26650 could be, and the possibly very serious consequences of this mod's defect, has led me to recommend not using this mod at all and speaking to HCigar about your options. If you do decide to use it I strongly recommend only using 18650's, very carefully. I realize that many of you have had no problems using 26650's in this device. But the risk remains and I must stand by my recommendation. Each person can make their own decision regarding this risk and I fully respect their decision.

From another german user, the + wire has a damage, can this make a short circuit when contact to the case?, and then the battery make boom?

Here a Video from the mod,......

Thats right. My English writing is not Good to write like you it done. Thanks

I Do not know. I Think the battery Was to long, and at the + from the mod its make a Shirt circuit. In Germany a lot of this mod was a Bomb with 26650 batterys

i have put a fogstar 26650 in the vt75c, and in one second a bomb was born!

EScribe 2.0 is released !

It is right that the production of DNA200 was discontinued???? i have hear it from a german Mod company.

yes, it is on

Whats this? My friend have this message in his escribe, but in my the message not comes!!!!

how many wh comes out with the vtc5a?

Go to my page: http://dna200.de/kurven_draht/ and download (Zum Testen Wattmodus mit Vorheizen). Pass : dna200

http://dna200.de/dna75/

yeah, that have work, thx James

a friend have ake update with sp3, now the problem: the display is black ,and when the dna is connectet with escribe comes the error: Can´t figure out the device version. other firmware flashing is not going.what now????

dont find a usb charging board with 2 ampere for dna60, can everyone help me?thx

the external site is from myself (dna200.de) and the same file like here