-
Posts
2,327 -
Joined
-
Last visited
-
Days Won
147
Content Type
Profiles
Forums
Downloads
Posts posted by dwcraig1
-
-
That's the newest EScribe, and the newest firmware is 9-30
-
The Opus is exceptionally pocket friendly when Murphy's Law comes into play. More times than I wish to admit I forget to lock it and with the way the fire button is located it pretty much isn't going to fire unintentionally.
I'm nearing 7 months with a black one, so far no problems other than I pushed the 510's insulator in some but I fixed that. Totally my fault there. -
I guess your talking about a pin in the balance plug that's on the board. Is it getting bent inserting the battery at an angle perhaps?
-
In the beginning the only manufactured DNA200 mod was the Opus so when one died of coarse it was an Opus.
But is the fatality rate actually any higher than others? Or does it just seem that way? -
I have all 4 of mine set to 35% on charging brightness, I doubt if it's noticeable as far as charging time goes.jarred.sayles said:Right. After giving it some thought. I figured thats what it was. SO I changed it and it did work. But now Im wondering if you do have the brightness on while charging how much longer will it take to fully charge with the display showing some what?
-
The excessive voltage drop on cell #2 pretty much narrows it down to the battery being at fault. Still have to call it guess work on my part though.
-
Sometimes I fell we need a "Like" button. This is one of them.FoggyMtnVape said:Yes, I submitted a ticket to evolv and they asked for the invoice so I sent them the next best thing (the shipping slip). They told me to send in the board or mod, which ever I could, so I desoldered the board and sent it in and they had a new one out to me in a couple days.
-
lewisss said:
[QUOTE=ChunkyButt200]i wouldn't put too much stock into hallmarks on he bottom of anything coming from china. cheap clones i own even have the whole gambit of "certifications". i just assumed if it had ce on the product and it came from china it stood for China Export! lol
Yes after a bit more research i have found out that on the hcigar it is in fact china export mark!!
CE (european directive mark) and CE China Export mark are identical apart from the spacing!
China Export being closer together[/QUOTE]LOL -
My TGT's have the "CE" logo, they also say "Made in Germany". They are clones though.
Edit: Oh darn, I went to check the authentic Taifun box and it's not here. I must have gave it to the guy I sold a clone to, at least I still have the authentic TGT here. -
ChunkyButt200, you I believe are correct about how it works.
Cell #2 is doing what I expected, the battery needs replaced. I still think there may be a problem with the wiring inside the battery but that pretty much means replace the battery for most folks. -
It would be great if you could post a screen shot like above while firing to be able to see the voltage drop on the individual cells.OSvaper said:Its like this now. Hope it gets better over the night.
Thank you all for help such a great community.
-
Here's a screen of mine when the battery was unbalanced more than this one, there was no unbalanced message and the mod worked good.
https://forum.evolvapor.com/topic/67594-topic/?do=findComment&comment=908452
There must be considerable voltage drop when under load perhaps. Looking like a bad cell or connection between cells under the shrink wrap.
I'm just thinking out loud here.
(my situation above ended up not being a bad battery BTW ) -
It's a slow process, slower than slow in fact.
-
Everyone has their own ideas, for example I set my one atty at 28 watts with 32 watts preheat. Some set theirs much higher.
Be sure to upload your settings to the device.
Good stuff here:
http://www.evolvapor.com/guide/story.html -
http://www.steam-engine.org/wirewiz.asp
select your wire, hit DNA200 tab. Don't use Internet Explorer as your web browser. -
You might try Hobbyking
-
[video]https://youtu.be/t1Xt8qubVDs[/video]
-
A bit off topic of the OP but a DNA200 mod with the ability to jump start a car is of some interest to me. Not that I want one, the idea of one just interests me.
Edit: I'm still working on my first cup of coffee so...... -
I only means that Microsoft didn't test it on XP, they had already given up support for XP by the time EScribe came to be.
Edit: early versions of EScribe had a glitch with Device Monitor but that was fixed in later versions, it works fine . -
My link in #7 post didn't work out to to correct post, try here:
https://forum.evolvapor.com/topic/67489-topic/?do=findComment&comment=907394
This should link to the entire thread as that was what I was trying for.
http://evolvapor.forumchitchat.com/post?id=7840635 -
It certainly fits with what others have posted.
-
Perhaps a long shot but maybe give this a look:
https://forum.evolvapor.com/topic/67489-topic/?do=findComment&comment=907393 -
Something is probably here somewhere but I can't locate it, perhaps someone else can.
-
Have a look here:davecho said:Hey guys anyone who can point me to an installation and assembly of a 3 18650 battery DNA 200? thank you very much guys.
https://forum.evolvapor.com/topic/67414-topic/?do=findComment&comment=906610
DNA 200 board, what wire should be used!? Solid or Fine Strand?
in Installation and Assembly
Posted
Fatdaddy has 16 gauge only
http://www.fatdaddyvapes.com/shop.html