Questions about the “Anti Burn” Feature and the “Fill Pod” Warning on the Oxva Pro 2 DNA

[liquid]

Hi everyone,  

I’ve been checking many threads about the “fill pod” warning on the Oxva Pro 2 DNA. Most people seem to have the opposite problem — they get frequent “fill pod” messages even when the pod still has plenty of liquid.  

 

But my device is the other way around. I’m using the SS coil, and when I insert the pod it shows “anti burn,” but I never get any “fill pod” warning at all. Because of that, I’ve already burned two pods.  

 

I’ve read a lot of replies and checked my settings in Escribe. Under Safety → Fill Pod, the feature is enabled, and I even set it to “High.”  

 

So my question is:  

Could this be a chip/firmware issue?  

My firmware version is 1.1 SP125.1 INT.

 

Any help or insight would be appreciated🫶

[Wayneo]

5 hours ago, liquid said:

So my question is:  

Could this be a chip/firmware issue?  

My firmware version is 1.1 SP125.1 INT.

You should update to the latest version (last post). Link in my signature line. I've never had that issue with any pod and you missed it could be a coil issue.

[liquid]

20小时前，韦尼欧说：

你应该更新到最新版本（最后一篇帖子）。链接放在我的签名线中。我用任何烟弹都没遇到过这个问题，你没注意到，可能是线圈问题。

我更新了固件，为了判断问题是芯片还是线圈引起的，我拆开了一个烧毁的烟弹，只保留线圈。然后我点火，带着那个线圈，这次它正常显示了“加注舱”警告。

 

所以看起来芯片和线圈都正常工作。

也许问题是我自己用得好，而不是硬件或固件的问题。

 

 

Edited 6 hours ago by liquid