SAC Posted January 23, 2023 Report Share Posted January 23, 2023 I got 2units DNA60 mod shows a lower resistance than other DNA60 mods. The other DNA60 mods have a resistance of 0.73-074Ω with the same atomizer (by using 3 difference dna60 mod). With my New 2units dna60 mods, both reading the resistance is 0.66Ω, which is 0.08Ω lower. What should i do to solve this problem? I'm just learn on the tutorial video about the offset from higher resistance, to lower resistance and could simply add the offset value. In this case, the resistance is 0.08Ω lower than the other dna60 mods. Link to comment Share on other sites More sharing options...
Wayneo Posted January 23, 2023 Report Share Posted January 23, 2023 So out of your 3 DNA60 mods, do any of them have USB ports? Let's refer to them as mod 1 and 2, showing the 0.66Ω value, and #3 having the 074Ω. 3 Link to comment Share on other sites More sharing options...
SAC Posted January 24, 2023 Author Report Share Posted January 24, 2023 On 1/23/2023 at 8:35 PM, Wayneo said: So out of your 3 DNA60 mods, do any of them have USB ports? Let's refer to them as mod 1 and 2, showing the 0.66Ω value, and #3 having the 074Ω. Expand Yes, that is correct. All of them have the USB port. In additional, I'm also checking with another atomizer on mod 1 and 2, and #3 DNA60 mods. its showing the same result which is mod 1 and 2 showing 0.08Ω lower than others #3 DNA60 mods. How should I do with mod 1 and 2 to calibrate such the same as others DNA60 mods. Thank you for your assist @Wayneo Link to comment Share on other sites More sharing options...
Wayneo Posted January 24, 2023 Report Share Posted January 24, 2023 In escribe do this Options → User Interface → Advanced so the ‘Mod tab’ shows. Then go to Mod → Electrical What currently shows for Mod 1, 2, and 3 Link to comment Share on other sites More sharing options...
SAC Posted January 24, 2023 Author Report Share Posted January 24, 2023 When I go to Advanced, there is no Electrical tab in Mod tab. But, when I chose Option → User Interface → Manufacturer i saw the Electrical tab that show Mod Resistance 0 Ω Then, what should i do? images attach below Link to comment Share on other sites More sharing options...
Wayneo Posted January 24, 2023 Report Share Posted January 24, 2023 What is that 'Mod resistance' for each of the 3 mods? 1 Link to comment Share on other sites More sharing options...
SAC Posted January 24, 2023 Author Report Share Posted January 24, 2023 The 'Mod Resistance' of #3 dna60 mods show on EScribe 0 Ω (in electrical tab) Link to comment Share on other sites More sharing options...
Wayneo Posted January 24, 2023 Report Share Posted January 24, 2023 On 1/24/2023 at 12:09 PM, Wayneo said: What currently shows for Mod 1, 2, and 3 Expand On 1/24/2023 at 2:19 PM, Wayneo said: What is that 'Mod resistance' for each of the 3 mods? Expand And what are these mods? #1, #2, and #3 Link to comment Share on other sites More sharing options...
SAC Posted January 24, 2023 Author Report Share Posted January 24, 2023 (edited) Currently by using atomizer dna60 mod 1 resistance 0.66Ω (new mod) dna60 mod 2 resistance 0.66Ω (new mod) dna60 mod 3 resistance 0.74Ω (old mod) dna60 mod 4 resistance 0.73Ω (old mod) dna60 mod 5 resistance 0.74Ω (old mod) so what should i do with mod 1 and mod 2, to get the same resistance as mod 3, 4 and 5. appreciate for your help. Thanks @Wayneo Edited January 24, 2023 by SAC Link to comment Share on other sites More sharing options...
Wayneo Posted January 24, 2023 Report Share Posted January 24, 2023 So you straight up refuse to answer MY questions, and this will be my last post to you. But I will answer your question. On 1/24/2023 at 5:47 PM, SAC said: so what should i do with mod 1 and mod 2, to get the same resistance as mod 3, 4 and 5. Expand You cannot do anything with mod 1 and mod 2. Link to comment Share on other sites More sharing options...
SAC Posted January 24, 2023 Author Report Share Posted January 24, 2023 I'm trying to answer your question. I'm just confused. sorry. On 1/24/2023 at 4:01 PM, Wayneo said: And what are these mods? #1, #2, and #3 Expand what do you mean about these mod? i don't get it. On 1/24/2023 at 2:19 PM, Wayneo said: What is that 'Mod resistance' for each of the 3 mods? Expand and what do you mean about 'Mod resistance'. ohm reading on mod? or ohm reading on Escribe? or what? Thank you for your coorperation. Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 24, 2023 Report Share Posted January 24, 2023 What brand of mods do you have. Example: Dovpo College DNA60 2 Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 24, 2023 Report Share Posted January 24, 2023 On this one the mod resistance is set to "zero", are all 5 mods set to zero? 1 Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 24, 2023 Report Share Posted January 24, 2023 This is an old video using an old version of EScribe but explains it well. 2 Link to comment Share on other sites More sharing options...
SAC Posted January 25, 2023 Author Report Share Posted January 25, 2023 (edited) On 1/24/2023 at 8:09 PM, dwcraig1 said: What brand of mods do you have. Example: Dovpo College DNA60 Expand All of my mod is a Champion mod by stickman and we are the modder as well. On 1/24/2023 at 8:18 PM, dwcraig1 said: On this one the mod resistance is set to "zero", are all 5 mods set to zero? Expand all 5 mods show the 'Mod Resistance' zero "0Ω" on EScribe software when i connect the device. That video explain well if your mod get HIGHER mod resistance, then u can add the offset. In this case, our new mod with new DNA60, get LOWER resistance, and i can not simply put "negative" offset. Its doesn't work by put negative on EScribe software. I really hope this problem can be solve smoothly. Thanks for your respond @Wayneo @dwcraig1. Appreciate it. Edited January 25, 2023 by SAC Link to comment Share on other sites More sharing options...
SAC Posted January 25, 2023 Author Report Share Posted January 25, 2023 On 1/24/2023 at 7:01 PM, Wayneo said: You cannot do anything with mod 1 and mod 2. Expand Regarding my previous order of 50units dna60, 2 of them was assembled as a mod (refer as mod 1 and mod 2), then I'm cannot do anything with that mod 1 and 2 @Wayneo? How about the balance 48units if the same situation happen? I believe this case must have a solution out there since I have no idea with that. I appreciate all of your help and cooperation. Thank you. Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 25, 2023 Report Share Posted January 25, 2023 I'm inclined to think that the mods with the lower resistance is closer to correct. I can't remember a DNA60 reading less, only higher. For sure zero is not the correct setting, usually 0.004 or higher. To check the mod resistance use atomizer analizer with a shorting 510 plug with mod resistance set to zero. Screw the shorting plug into the mods 510 and put the resulting figure into the mod resistance (electrical tab) and upload to device. I use a cartomizer that I soldered over it's 510 connection, it works great. This could be done also with a 510 to 510 adapter or an old atty with brass base/510. 1 1 Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 25, 2023 Report Share Posted January 25, 2023 Be aware that the zero in the box is not the mod resistance, this is just what it is set to. Put your value in the box and upload to device. 1 1 Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 27, 2023 Report Share Posted January 27, 2023 I'm going to make another attempt to show how to set mod resistance. This can not be done on all DNA boards. Not with the 75C, 100C and 200 boards. It use to be able to be done with 200's but a firmware update stopped that long ago. Start by cleaning mod's 510 and the plug with alcohol. Using EScribe set mod resistance to Zero. Start Atomizer Analizer with mod connected and screw the shorting plug into the mod's 510. Put the value from Atomizer Analizer into the Mod Resistance box and upload settings 1 Link to comment Share on other sites More sharing options...
SAC Posted February 7, 2023 Author Report Share Posted February 7, 2023 @dwcraig1 @Wayneo Thanks a lot for your help. I appreciate all of your suggestion and cooperation. Evolve replied the answer as attached printscreen below. 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now