Ahmed Nagy Posted June 19, 2021 Report Share Posted June 19, 2021 Good morning fam i have thelema dna 250c and I noticed that boost not working while I press fire to see changes on the screen! But the number on watt not change as it used to be! boost is on and punch on 5 atty is pioneer mtl rta please advice 🙏 Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 19, 2021 Report Share Posted June 19, 2021 For starters make sure that you uploaded settings to device. Make sure that you are using the desired profile. Use EScribe's Devise Monitor to check wattage output when firing. Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 (edited) Thanks for fast reply I just received the mod 2 days ago and never messing with anything yet is that normal that boost not working as a new device? profile is watt Edited June 19, 2021 by Ahmed Nagy Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 19, 2021 Report Share Posted June 19, 2021 Look at the settings in EScribe Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 Well i will do it when I arrive home any tips or something to out on my consideration when am on Escripe thanks for help I appreciate it 🙏 Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 19, 2021 Report Share Posted June 19, 2021 Perhaps save your current configuration. Under File/Save As Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 On 6/19/2021 at 7:49 AM, dwcraig1 said: Perhaps save your current configuration. Under File/Save As Expand Thanks i will look at it 🙏 Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 19, 2021 Report Share Posted June 19, 2021 Oh, I seemed to have overlooked this, make sure that you are using the International firmware. In the bottom right lower corner of Device Monitor will show the current firmware that's being used. Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 On 6/19/2021 at 8:12 AM, dwcraig1 said: Oh, I seemed to have overlooked this, make sure that you are using the International firmware. In the bottom right lower corner of Device Monitor will show the current firmware that's being used. Expand Yah i will put that in my consideration and also am gonna restore it to default and try here and there to figure out the problem .. thanks for that I appreciate it .. have a great day 🙏 Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 19, 2021 Report Share Posted June 19, 2021 If the firmware is the US version that is the problem. Restore to default as last resort and only after you saved your original configuration. Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 On 6/19/2021 at 12:08 PM, dwcraig1 said: If the firmware is the US version that is the problem. Restore to default as last resort and only after you saved your original configuration. Expand Yah i will make sure that it international version but there’s a question , why us version not allowed boost features? Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 19, 2021 Report Share Posted June 19, 2021 Federal laws, the government thinks we should smoke tobacco and pay the taxes on the cigarettes. Nothing new was allowed the be added to an existing product. Every piece of your vape is considered nicotine in the US. The ;land of the free.......right? Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 On 6/19/2021 at 1:26 PM, dwcraig1 said: Federal laws, the government thinks we should smoke tobacco and pay the taxes on the cigarettes. Nothing new was allowed the be added to an existing product. Every piece of your vape is considered nicotine in the US. The ;land of the free.......right? Expand So the us version makes the chip like any other Chinese chips i got it .. i will see if my device on international or us version and if it’s on international so there’s a problem right? Link to comment Share on other sites More sharing options...
dwcraig1 Posted June 19, 2021 Report Share Posted June 19, 2021 It just keeps the software as is till the application to the government is approved or denied, Things had to stay as they were from US vape manufacturers till the cutoff date. Note Evolv sell nothing to individual any longer. The software is considered nicotine. Even zero nicotine e-liquid is considered nicotine. The big tobacco companies have their vape products for sale all over. Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 On 6/19/2021 at 1:54 PM, dwcraig1 said: It just keeps the software as is till the application to the government is approved or denied, Things had to stay as they were from US vape manufacturers till the cutoff date. Note Evolv sell nothing to individual any longer. The software is considered nicotine. Even zero nicotine e-liquid is considered nicotine. The big tobacco companies have their vape products for sale all over. Expand Understood yah Link to comment Share on other sites More sharing options...
Wayneo Posted June 19, 2021 Report Share Posted June 19, 2021 On 6/19/2021 at 1:47 PM, Ahmed Nagy said: i will see if my device on international or us version and if it’s on international so there’s a problem right? Expand Rarely a board or mod problem. More of a user setting or theme misunderstanding/issue. Link to comment Share on other sites More sharing options...
Wayneo Posted June 19, 2021 Report Share Posted June 19, 2021 On 6/19/2021 at 1:47 PM, Ahmed Nagy said: So the us version makes the chip like any other Chinese chips i got it .. Expand China has not followed American rules/laws. They still try to innovate, but this software suite is still arguably the best from any mfgr, in terms of TC, settings, tools. In fact, it's soooo good, the Russians made a knock of it. Till Replay came along. 1 Link to comment Share on other sites More sharing options...
CMK Posted June 19, 2021 Report Share Posted June 19, 2021 On 6/19/2021 at 7:36 AM, dwcraig1 said: Use EScribe's Devise Monitor to check wattage output when firing. Expand Es gibt hier auch diverse Themes, welche sowohl die Boost-Einstellungen zuverlässig anzeigen, als auch die Leistungsabgabe des letzten Puffs sauber dokumentieren. On 6/19/2021 at 2:13 PM, Wayneo said: More of a user setting or theme misunderstanding/issue. Expand Sehe ich genauso - häufig werden Funktionen des Chipsatzes falsch implementiert, oder korrelieren nicht mit den Werkseinstellungen. Boost, Punch, Preheat, Replay - bei Problemen ist meist ein fehlerhaftes Theme, oder/und ein Missverständnis über die Funktionsweise die Ursache. Um welches Theme es sich hier handelt, wurde noch gar nicht erwähnt. Link to comment Share on other sites More sharing options...
Ahmed Nagy Posted June 19, 2021 Author Report Share Posted June 19, 2021 Thanks guys it worked after i made restore to default 🙏 1 Link to comment Share on other sites More sharing options...
Amjad Posted July 16, 2022 Report Share Posted July 16, 2022 On 6/19/2021 at 5:59 PM, Ahmed Nagy said: Thanks guys it worked after i made restore to default 🙏 Expand I have the same problem, when i hit the fire the watt doesn't xhange, but if i hit it in diagnostics it the watt boost, is it normal, i tried to reset it and its a new thelema 100c mod i have it for 1 day Link to comment Share on other sites More sharing options...
Amjad Posted July 16, 2022 Report Share Posted July 16, 2022 By the way im using default theme Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 16, 2022 Report Share Posted July 16, 2022 What does EScribe's Device Monitor show? 1 Link to comment Share on other sites More sharing options...
Amjad Posted July 16, 2022 Report Share Posted July 16, 2022 It shows that the watt changes higher when i hit the fire then it settle back to the preset watt, but the device monitor stays the same watt with no changes, i guess its from the default theme Link to comment Share on other sites More sharing options...
dwcraig1 Posted July 17, 2022 Report Share Posted July 17, 2022 Try this: 1 Link to comment Share on other sites More sharing options...
Amjad Posted July 17, 2022 Report Share Posted July 17, 2022 I'll try after work and update u but really appreciate ur fast reply Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now