jinx'd Posted March 9, 2021 Report Share Posted March 9, 2021 (edited) hello. i just got in my new screen for my Drone. i am trying to release the clamp for the ribbon, but its not coming loose, and i don't want to break anything. please advice, a vid would be great. i searched and didn't find anything. Thanx Edited March 9, 2021 by jinx'd Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 There are pictures in this link. https://forum.evolvapor.com/topic/71319-how-to-change-a-screen-on-lostvape-paranormal/?tab=comments#comment-934609 The cover hinges at each side where the ribbon goes underneath the connector. Go to the opposite end, and lift/push the cover towards the ribbon. I think I've used a fingernail or tweezer at the edge of the cover. It will stand vertical to the board. Make sure to slide the new cable in straight and far enough. When you push that cover down, you'll hear/feel it click in. Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 Thanx. i was trying to lift the wrong part. while we are here, let me ask. the screen, it was stuck to its mounting panel, idk if it will restick the new one. is there something i should put on there, or just leave it, or what ? Thanx oh, is there a good way to remove juice from all the nooks and crannies ? Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 4 minutes ago, jinx'd said: the screen, it was stuck to its mounting panel, idk if it will restick the new one. is there something i should put on there, or just leave it, or what ? Never ripped one apart so you'll just have to see. IMHO it's really there so it doesn't move during re-assembly, but it's not a requirement. You might find the thinnest double edged tape. Isopropyl alcohol with a qtip works for nooks and crannies. Wipe it all down. 👍 1 Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 thanx. i will report back later with the results. oh, another thing have you ever heard of someone putting some type of screen protector film on the screens ? i bought some for this purpose, but have never tried it. the film for phones. Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 Yes, some have used colored film to change text on the black and white boards. Depending on the thickness, all your buttons and USB connector might be a smidgen more flush to the housing Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 thanx 🙂 Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 i just stated to install a new screen in a LV Drone. the ribbon is way to long. i am guessing they made them universal. so, how do i shorten it ? thanx Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 37 minutes ago, jinx'd said: i just stated to install a new screen in a LV Drone. the ribbon is way to long. i am guessing they made them universal. so, how do i shorten it ? I merged this post into your original thread from earlier. It's all the same topic. If you followed that link I gave you, right there in the instructions it shows to bend the cable under the holder away from the fire button. Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 ok, i will go look ffor that. thanx Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 @jinx'd 🤣I merged backwards, but all fixed up (just keep things clean) 😎 1 Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 well that ribbon gets all bent up, i hope its robust. seems fragile to me Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 its all good man, do your thing. Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 7 minutes ago, jinx'd said: well that ribbon gets all bent up, i hope its robust. seems fragile to me Did ya look at the pics? There's room under there (away from the fire button), it'll lay flat. We've been doing that for 5+ years 👍 Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 ok. when i installed the first screen = all white display. i tried my other 2 screens, same thing. so i went back to the first screen and fiddled with it and got it working. now, trying to fold the ribbon in place = white screen. any ideas ? Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 2 minutes ago, Wayneo said: Did ya look at the pics? There's room under there (away from the fire button), it'll lay flat. We've been doing that for 5+ years 👍 the one pic i saw, the ribbon was folded over the terminal, then back to the folded screen. am i missing something Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 Pictures 1672 - 1675. Instructions 14-16. As far as wiping things down did you also wipe that zif connector connections? I think around 8-10 of them. Maybe there was juice on those also. Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 idk how i would clean the zif, other than spraying it with something. saying that, the chip doesn't have any juice on it. it was all on the inside of the mounting housing that holds the screen. old ribbon is dry also. so, how would i clean those ? Link to comment Share on other sites More sharing options...
Wayneo Posted March 9, 2021 Report Share Posted March 9, 2021 12 minutes ago, jinx'd said: ... the chip doesn't have any juice on it. it was all on the inside of the mounting housing that holds the screen. old ribbon is dry also. I must be confused about the screens, but Isopropyl alcohol with a qtip. Just make sure the cable is straight, pushed in, and you hear/feel the click. Link to comment Share on other sites More sharing options...
jinx'd Posted March 9, 2021 Author Report Share Posted March 9, 2021 ok. but i see no way to get inside the zif to touch with a q-tip. the ribon goes all the way, but does feel loose, i can move the screen side to side with the connection being the hinge point. the clamp does not clamp it tight, but i can not pull it out. i press on the zif a little and that does nothing. Link to comment Share on other sites More sharing options...
jinx'd Posted March 10, 2021 Author Report Share Posted March 10, 2021 (edited) its done and working well. i had to tweek the terminals. Thanx for the help, Wayne 👍 Edited March 10, 2021 by jinx'd Link to comment Share on other sites More sharing options...
Wayneo Posted March 10, 2021 Report Share Posted March 10, 2021 Great job @jinx'd 👍 Link to comment Share on other sites More sharing options...
jinx'd Posted March 10, 2021 Author Report Share Posted March 10, 2021 i wish it wasn't such a pita, but that is par for me. i wonder why i had to tweek the contacts. but its working, just used it, so that is all that matters. well, and that it keeps working and doesn't get damaged again. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now