Jump to content

Paranormal 250c not using full wattage


Recommended Posts

I think this because it is a 2 battery cell 250C and the resistance is causing it to hit the voltage cut off,  the simple answer is use a lower resistance coil if you want 95 W as you can't add battery cells.   This board is a step down converter and the data sheet has 10 V as the max output voltage, this would be with 4 battery cells, you only have half that and are getting 7.3 V so it is not a halving of the max, but I would put my money on this being your issue.  If you lower the power so the voltage is < 7 V is it accurate then? if so my guess is probably right.

 

ETA lower battery charge will negatively affect this, but it does not need to be an issue if you can lower your resistance enough.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...