Duniya Posted May 5, 2018 Report Share Posted May 5, 2018 I had my mod just two months ago and I have suffering from hot tank issue and the customer services told me this could be due to the coil. I have tried many coils and many tanks but the same issue is still there. The mod is THE REBEL MOD SQUONKER- EVOLV DNA 167 - 2 X 18650. Any ideas ? Link to comment Share on other sites More sharing options...
retird Posted May 5, 2018 Report Share Posted May 5, 2018 What are the settings of your profile and what type of coil...... Link to comment Share on other sites More sharing options...
Duniya Posted May 5, 2018 Author Report Share Posted May 5, 2018 HI thanks to come back to me, I am using watt profile and I am using fused clapton N80 Link to comment Share on other sites More sharing options...
Duniya Posted May 5, 2018 Author Report Share Posted May 5, 2018 the resistance of two tanks i have are 0.2 and 0.13 and all of them cause the same problem Link to comment Share on other sites More sharing options...
Duniya Posted May 5, 2018 Author Report Share Posted May 5, 2018 i have tried every profile and i get the same issue Link to comment Share on other sites More sharing options...
67exec Posted May 7, 2018 Report Share Posted May 7, 2018 Have you tried less power? What gauge is your wire? Heatflux could be your issue Link to comment Share on other sites More sharing options...
Duniya Posted May 7, 2018 Author Report Share Posted May 7, 2018 (edited) I am using Fused Clapton Wire N80. wire size 26/36 ○ This Wire is a dual round wire wrapped with 36ga(0.127mm) Edited May 7, 2018 by Duniya Link to comment Share on other sites More sharing options...
Duniya Posted May 7, 2018 Author Report Share Posted May 7, 2018 any ideas i am not familiar with heatflux Link to comment Share on other sites More sharing options...
67exec Posted May 7, 2018 Report Share Posted May 7, 2018 Should have been heat capacity, and that is how long it takes the coil to heat up and how long it stays hot after you quit applying power. According to steam engine your coils have what I consider to be a relatively high heat capacity for a 22mm dripper, and probably borderline even for a 24mm dripper Link to comment Share on other sites More sharing options...
Duniya Posted May 8, 2018 Author Report Share Posted May 8, 2018 So what should i do. I have tried the same tank with the same coil with another device and it was working just fine. Link to comment Share on other sites More sharing options...
dwcraig1 Posted May 8, 2018 Report Share Posted May 8, 2018 Maybe not what is happening but make sure the coil isn't touching the inside of the chamber. I've had that happen a time or two using big coils and the result was a hot atomiser. Link to comment Share on other sites More sharing options...
Duniya Posted May 8, 2018 Author Report Share Posted May 8, 2018 it is not touching but i still have this problem. Do you think could be a fault in 510 connector itself? Link to comment Share on other sites More sharing options...
67exec Posted May 8, 2018 Report Share Posted May 8, 2018 Post some pics, build, 510, etc. It's way easier to diagnose when we can see things Link to comment Share on other sites More sharing options...
Duniya Posted May 8, 2018 Author Report Share Posted May 8, 2018 ok I will do once I go home thank you very much for your help Link to comment Share on other sites More sharing options...
Duniya Posted May 8, 2018 Author Report Share Posted May 8, 2018 i will do once I go home many thanks for your help Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now