Therion DNA75 batteries issues

[chrismel]

Hey all I need o factory clean firmware file for my Therion dna 75 mode .I have the Therion dna 75 dual battery’s mod. I use yesterday the Escribe suite but after that I have batteries problem my mod see only one battery. I change batteries, use one , use two , I changed  batteries positions in both side and recognized them in both positions, I do factory reseat but I have still the problem . Please help

[giz_60]

Lost_Vape_Therion_75.ecig

[giz_60]

59 minutes ago, chrismel said:

Hey all I need o factory clean firmware file for my Therion dna 75 mode .I have the Therion dna 75 dual battery’s mod. I use yesterday the Escribe suite but after that I have batteries problem my mod see only one battery. I change batteries, use one , use two , I changed  batteries positions in both side and recognized them in both positions, I do factory reseat but I have still the problem . Please help

You need to keep in mind that the 75 board & Escribe do NOT monitor each battery, but sees the 2 batteries as one since they are in a parallel configuration.

[chrismel]

They are in a parallel configuration but i see in the screen battery pack  4.2v....before connect the mod at escribe I was seeing 8-8.2v..and the battery now ends in 6-8 hours ......before that i had all day battery....whats wrong?

[giz_60]

There is no way you should be seeing more than 4.2v on the 75 board...are you sure you are not mistaking it for another of your mods...like your Drone BF?

Edit: With the cells in a parallel configuration, they will show up as 1 (4.2v) cell....not 8 something (series configuration)

Edited November 24, 2017 by giz_60
Edit

[retird]

Could you be mistaking the voltage reading with your other device (Drone 166) which has batteries in series (8.4 v). DNA75's are only 4.2 volt for one battery and 4.2 for parallel batteries. Don't try to put your batteries in series on the 75.....

[chrismel]

yes you are right