HELP!!Finder 167 preheat can't be change

[franzcantoz]

i buy new finder 167, from factory setting on preheat 30watt and i try change with escribe.sucses change on software but on mod preheat still on 30watt. I try all material setting and all wire include ss316,but it not work. that any solution for my problem?? please help...thanks before

[retird]

After changing setting in EScribe did you upload the settings to the device?

[Wayneo]

.

Edited October 28, 2017 by Wayneo

[franzcantoz]

  On 10/28/2017 at 1:55 PM, retird said:

After changing setting in EScribe did you upload the settings to the device?

Expand  

yes i do that...but still no work,change theme sucses and all setting...only preheat change always not work on mod

[Wayneo]

Is your preheat value greater than the power setting in that profile? 

[franzcantoz]

  On 10/28/2017 at 3:30 PM, Wayneo said:

Is your preheat value greater than the power setting in that profile? 

Expand  

on profile1 escribe i set 70w for preheat and 60w for power then i upload setting,is that wrong?

but on device work 30w preheat and 60w power ....if i firing feel delay

[Wayneo]

  On 10/28/2017 at 3:36 PM, franzcantoz said:

on profile1 escribe i set 70w for preheat and 60w for power then i upload setting,is that wrong?

Expand  

Sounds good. Preheat > Power.

  On 10/28/2017 at 3:36 PM, franzcantoz said:

but on device work 30w preheat and 60w power

Expand  

There you get NO preheat, just power

[franzcantoz]

  On 10/28/2017 at 5:13 PM, Wayneo said:

Sounds good. Preheat > Power.

There you get NO preheat, just power

Expand  

yup..if i firing always start 30w then up 60w according to power settings