noob ? my battery indicator shows empty

[vivd]

Hi got my reuleaux on friday got 3 x vtc 4s (2100mah) fully charged battery indicator shows full after 8-10 hrs indicator shows empty but when checking in the software shows batteries at 3.6v
been using it with empty indicator for 4hrs and batteries showing as 3.45v any ideas

[bmclaurin]

It's probably the reverse protection rings on the battery tray preventing proper contact. See this thread, which ironically was posted within minutes of yours.

https://forum.evolvapor.com/topic/67725-topic/?do=findComment&comment=909545

[vivd]

thks but mine make contact and charge vis usb strange got some nippple batteries coming see what happens

[bobjohnson]

3.6v is probably set as 0% charge in the software. 3.6v is pretty dead for an 18650.

[Spector NS5 RD]

heres the answer. your watt hours are set incorrectly. under the mod tab - manufactures settings - and check what number is in the field for watt hours. 23.31 is the calculated number, but i recommend you run battery analyzer for your specific vtc4's. 3.6 volts is not dead for an 18650. 2.5 is dead. enter anywhere between 2.8-3.0 volts for cell soft cutoff. please do ur self a favor and this entire tnread. help u get knowledge.      

https://forum.evolvapor.com/topic/65604-topic/

[vivd]

thanks very much i'll have a read today

[vivd]

cheers chunky that sorted it right out i was using the wrong mah but its sorted now cheers