combatwombat Posted January 1, 2016 Author Report Posted January 1, 2016 I have bought two batteries now and the board will drain both too low. Right now cell 1 - 1.9v, cell 2 - .96v, cell 3 - 1.98v. I have set the cell cutoff to 2.7 but the board seems to ignore this. Any help would be appreciated as I have no idea what is going on because it happened with two batteries. The batteries will work fine for a few days to weeks then drain way below. So now two batteries are garbage because the board or can i salvage them with a external charger?
combatwombat Posted January 4, 2016 Author Report Posted January 4, 2016 had to wait for it to charge to 1.01 v at 0.015a current then perform usb recovery. Strange, when i set cell cutoff to 3.2 it worked with a check battery msg. My other battery is 0.00v on all 3 cells and seems not to charge at all.
combatwombat Posted January 5, 2016 Author Report Posted January 5, 2016 I believe for my lifepo4 battery or a bug in software I have to change the soft voltage cutoff and upload settings for it to work correctly. I want to try battery analyzer, as I am messing with the curve but afraid of frying something and the meter for lifepo4 is a crapshoot anyhow due to how the battery acts.
blueridgedog Posted January 5, 2016 Report Posted January 5, 2016 I do not have experience with lifepo4, but I am surprised that cell two is so much lower than the others.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now