leanneomgz Posted February 5, 2016 Author Report Share Posted February 5, 2016 Hi!So, I got a DNA 200 Reuleaux & when I got it there was no third field displayed, it was just ohms, voltage & then wattage as the main display. I've now to the third field coming up now that I've reset it back to factory & I want to have just the two fields back! I've tried everything I can think ofAny suggestions?! Link to comment Share on other sites More sharing options...
VapingBad Posted February 5, 2016 Report Share Posted February 5, 2016 My Reuleaux came with temp in the 3rd field, maybe you have temp limiting off either by adjusting the temp above 600 F or in a profile with it turned off. Link to comment Share on other sites More sharing options...
leanneomgz Posted February 5, 2016 Author Report Share Posted February 5, 2016 When I turn the temp off it just displays as ---F so its still there but inactive. When I turn it to 600F for example, it goes to the same thing. But before I reset it there was literally no 3rd field & I'm at a loss as to how it was like that & I want it back Cant quite get my head around EScribe to get it to work Link to comment Share on other sites More sharing options...
retird Posted February 5, 2016 Report Share Posted February 5, 2016 Have you tried to re-install Reuleaux's setup file again. It is available on their web site:http://www.wismec.com/product/reuleaux-dna200/ Link to comment Share on other sites More sharing options...
leanneomgz Posted February 5, 2016 Author Report Share Posted February 5, 2016 I've just tried to do that but no luck. Just a bit confused as to how I got it without the 3rd default field now I cant seem to find a way to get rid of it? Link to comment Share on other sites More sharing options...
smueller Posted February 28, 2016 Report Share Posted February 28, 2016 I know what happened. Your "third field" was the profile name. Change it back to that and make sure your profile your using doesnt have a profile display name. THe box next to the profile name on the profile page. make sure that is blank and it will go away again as long as the third one is set to profile name.get it?so for example on the display page it should be1. Ohms (or whatever)2. Voltage (or whatever)3. Profile NameThen as stated above on the Profiles page where your 8 profiles are......You have the Actual Profile Name and next to it a box where you can name it for the above display. Just make sure that box is empty for all your profiles and you should be good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now