Car147 Posted October 8, 2016 Author Report Share Posted October 8, 2016 Hi AllI have a problem that's developed in the last couple of weeks with my Efusion DNA200, when i go to fire the device sometimes it will, other times nothing, i am thinking it's fire button issue as the screen does not change as if it had fired. The mods 9 mths old so out of warranty, i might just bite the bullet and throw a 250 in, or try and source the button.Any advice appreciated, Link to comment Share on other sites More sharing options...
dwcraig1 Posted October 8, 2016 Report Share Posted October 8, 2016 EScribe will show if the button is working. If you decide to put in the 250 be sure to open a ticket with Evolv on the 200 board.....or open one now on what you have.https://helpdesk.evolvapor.com/index.php?a=addBTW, it's small stuff but most of the button can be disassembled/assembled (the button cover, button, disc) Link to comment Share on other sites More sharing options...
Car147 Posted October 8, 2016 Author Report Share Posted October 8, 2016 Cheer's for the reply and info. I should have thought about sticking it on Escribe as that will show straight away where the problem lays, good call. If it does turn out to be the button i may just get one from RS in the UK if they stock an equivalent , but will talk to Evolv beforehand.Many thanks for the help Link to comment Share on other sites More sharing options...
Car147 Posted October 8, 2016 Author Report Share Posted October 8, 2016 Update, when connected to Escribe a window popped up saying there was a problem with some files missing? and requested reverting to factory settings. i did revert back and so far after setting it all up again it seems fine so far, so i'll just keep an eye on it for now. Link to comment Share on other sites More sharing options...
Car147 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Hmm, same fault again this morning, i also notice in Escribe that there's no change when firing the mod running device monitor, so it does seem like a faulty fire switch, i'll see what Evolv come up with.Not bad on the reliability as that's the first issue i have had in 8 DNA mods (Mixture of 75's and 200's) since they were launched. Link to comment Share on other sites More sharing options...
dwcraig1 Posted October 9, 2016 Report Share Posted October 9, 2016 Well I was wrong about Device Monitor showing the fire button if pressed,it shows the up/down but not fire. I tied it just now. Link to comment Share on other sites More sharing options...
dwcraig1 Posted October 9, 2016 Report Share Posted October 9, 2016 This post may be of some interest to you.https://forum.evolvapor.com/topic/66851-topic/?do=findComment&comment=901399 Link to comment Share on other sites More sharing options...
VapingBad Posted October 9, 2016 Report Share Posted October 9, 2016 I was going to suggest just that: taking the bottom cover off and giving it a clean in IPA. Link to comment Share on other sites More sharing options...
Car147 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Cheer's gents, i'll give that a try. Link to comment Share on other sites More sharing options...
VapingBad Posted October 9, 2016 Report Share Posted October 9, 2016 To see what I mean, the metal disc and contacts can get dirty, check which way up the disc goes so you put it back correctly. Link to comment Share on other sites More sharing options...
Car147 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Yup, sorry @Vapingbad forgot to post back. I did as you said and its working fine now, wasn't too bad to do in all honesty. I just had to go easy to make sure i did'nt get it out of shape.Thanks guys! Link to comment Share on other sites More sharing options...
VapingBad Posted October 9, 2016 Report Share Posted October 9, 2016 Glad you go it going Car! Link to comment Share on other sites More sharing options...
Car147 Posted October 9, 2016 Author Report Share Posted October 9, 2016 Cheer's m8 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now