67exec Posted January 15, 2017 Author Report Share Posted January 15, 2017 So I built a dna 250 in the silo-950 case and used a venom fly 800 3s 30c battery, since I've had good luck with their batts in rc. Ran 4 charge/discharge cycles on my hobby charger before installing, then ran the battery analyzer once installed. It came up with 8.405wh due to 1 cell losing performance under 3.5v. (contacting venom on monday, hopefully chopping connector off didn't void warranty.) Anyways, I accepted those results for my battery and now the indicator shows empty while pack voltage is still 11.82, and all cells show 3.94. Any clue? Link to comment Share on other sites More sharing options...
VapingBad Posted January 15, 2017 Report Share Posted January 15, 2017 Check the value for 3.94 V in the battery curve is not low, but also allow a full cycle or two to let the gauge sync. Link to comment Share on other sites More sharing options...
67exec Posted January 21, 2017 Author Report Share Posted January 21, 2017 After several cycles, gauges is pretty close, need to run analyzer again, as battery seems to be performing better. (warranty went out the window with the connector) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now