NMEones

I never opened that... at least to my knowledge I haven’t... but even so, wouldn’t it just update the correct time? The time is actually getting reset back to 12:00 and date 1/1/00

A little off topic... does your device keep resetting the time and date? I don’t notice when it happened, just eventually notice that it does.

I previously had it set to watts, left it how it was when I got it, didn’t want to mess with it since I didn’t know how it would effect anything,, I do know that I never changed it... I didn’t even go into escribe when I uploaded the theme and I had the field set to read only so I couldn’t change it on the mod. Once I uploaded the theme I went into the puff info page and it said watts, I took a puff and it switched to titanium. I honestly didn’t know that the chip didn’t change the material on it’s own (this is my first dna, that’s why I didn’t mess with escribe except to turn replay on) so now I’m a bit more baffled...

I know I didn’t change it... I didn’t even touch escribe except to upload the theme. Should I just manually change the material and see if it sticks?

i was in wattage mode with replay and i originally had Watts chosen at material in escribe. it just recently switched over to titanium

So the other day I decided to make my own theme and I have to say im extremely happy with the way it turned out... in my Last Puff Info page i added a field to say what the coil material is being used... Since I got the device, Ive only been using SS316L Fralien coils.... for some reason the device is saying that im using Titanium coils.. I just checked Escrbe and its saying the same thing? very confused about whats going on... I make my own coils so its not like someone sent me Titanium Coils as SS coils... Any insight would be most appreciated... thanks in advance!!

Some of the Fralien coils I made for the replay mode... full SS316L and vaping beautifully!

the way it was explained to me was that after you drip the coil cools down so your first few hits will be hitting harder until it reaches the recorded temp. this is juts what i was told... ive been wondering about this as well and the only other thing i an think of is the "Replay Warmth". i have too look into that more before i mess with it and lower it a bit.

I’m actually buying a 3D printer so I’ll be able to print an enclosure but I really want a metal one as well....

I’m looking to get into building a DNA250C Squonk mod... anyone know of a good enclosure for this? 2s... thanks in advance!

This only happened with 1 atomizer so far... I actually cleaned it the other day and just put some new coils in it tonight. Im going to try it out Tom. And see if the issue still persists with it. It works flawlessly with my other RDAs though so I’m kind leaning towards an issue with the atomizer rather then the mod

I have this issue sometimes when I wake up as well. I haven’t had it happen during the day though.

My black rabbit works like a dream in Replay... it was just my grey one.. weird!

I don’t see the gloss option on their site? Did you contact them for that?

Any time! And yeah I’m loving it as well!!! It’s my first dna device and ouuuwie what a time to get a dna device!!

I actually had this same issue with my dead rabbit (S316L Fraliens) and tried switching on dubious coils and it didn’t work... someone mentioned that I might have to break the rabbit down and give it a good cleaning

Yeah but if you want it to have replay you need to add it to the theme and then activate replay for a profile on escribe

Actually... I wanted to swap flavors (was testing a new DIY flavor) so I took the cotton out and went to dry burn a bit before I cleaned the rda and I noticed a few hot spots... I worked them out and then looked at the screen and it actually was going to let me replay... I guess the hot spot some how made the chip misread the coil material or something? I didn’t wick it up yet but I’ll leep you updated and let you know what’s going on! Thanks for the response!

So I build/sell coils so I wanted to try a mixture of some n80 and SS316L in a Fralien coil. I used 1x 28g n80 1x 28g SS316L 3x .3x.1 n80 3x .3x.1 SS316L with 36g SS316L alien wrap. Now I assumed this was ok for Replay mode... was my assumption correct? If it is then I have another RDA that won’t register temp control coils into my mod. Thanks in advance for any insight!

Yeah I actually restored to factory settings by mistake (before I made this post) and I noticed my battery life is horrible now. Going to check out what you said and hopefully it downloaded my initial settings! Thanks a lot, really appreciate it!!

I’m not in front of my computer right now so I’m not 100% sure the name of the button.... I believe it was “Restore to Defualts” or “Restore to Manufacture Defaults”. I would click this button and then save a backup of the default settings? I did change a few things already (nothing crazy where it wasn’t self explanatory). U

I gave it a quick cleaning before I put the new build in it but I’ll give it an extensive cleaning once I get home... I’ll let you guys know if that worked or not! Thanks again for the reply, means a lot to have a place to turn to for some help. There’s a lot more going on with these DNA devices then I’m used to!

Also, if there’s anything else I should know (not just about replay) that you could tell me, that would be awesome. Like I said, this is my first DNA so I’m kinda just winging everything. I’m trying not to mess with some of the escribe settings because I’ve heard of some people really messing their device up because they didn’t know what they were actually doing.

Yeah I kinda figured that out since last night! Thanks for the replies!! Any idea on my first issue? My dead rabbit wouldn’t register as having SS coils but when I swapped the coils to my Phobia RDA it did

ok so i took the coils out of the dead rabbit and put them into my phobia rda and the mod is recognizing it as SS and letting me go into replay. now the new issue thats arising is in actual replay mode. now idk if this is how its supposed to be working but its odd if it does (at least in my mind).. i was vaping 105w and went into replay. i didnt check the Watts for the next few hits but they felt good until i obviously had to squonk some more juice and it started ramping down... once i squonked some more juice and took a puff i felt it hit a lot harder so i looked at the watts and it was at 135w. then 130, 120, 115 and then went to 95 when it started to dry and i had to squonk. i was lead to believe you were meant to get the same consistent puff each time until it had to throttle down... I didnt think that it would go over my initial last puff recording.