Jump to content
Evolv DNA Forum

Geoff

Members
 View Profile  See their activity

  • Posts

    10

  • Joined

  • Last visited

Geoff's Achievements

Member

Member (2/3)

1

Reputation

  1. Geoff
    Hi LowBytes I am sorry I misunderstood the nature of the problem. I am truly surprised this problems exists. I thought that the DNA 250's and 200's were very solid boards- perhaps this may not be the case. I have not had a problem with mine so far- though I have only had the Drone for a couple weeks- hopefully I won't run into problems in the future. Regards Geoff
  2. Geoff
    Batteries Now Charged
  3. Geoff
    I had similar problems with my drone- it turned out that while updating escibe I also updated the wrong firmware-ie I ended up with the config for a Triade on my drone- so battery 3 would read as 0V - the drone only has two batteries. Go to the manufactures website- download the firmware for your Mod- then unzip to your desktop. Open escibe - then open the firmware from your desktop from the file menu in escibe- upload to your mod. This worked for me.
  4. Geoff
    It should be set to 167W by default for a Drone!
  5. Geoff
    Her are a couple Screenshots of what to look for.
  6. Geoff
    Sorry,- DJLsb is the correct channel.
  7. Geoff
    DLJsb on youtube has an eScibe tutorial.
  8. Geoff
    Hi Again dleone32. I have a Drone- so only two batteries to deal with- your Mod has three- still use escribe to monitor the charge current in the Device Monitor Tab of escribe.
  9. Geoff
    Yes- you must Monitor your batteries with Device Monitor and note the Wh rating is when the charge current drops to just about 0 mA. For my old but still good 25R's the WH reading is ~13.9.
  10. Geoff
    Anybody else notice that the default Mod config from Lost Vape has the Max Kanthal power set to 250W?
×
×
  • Create New...