Darthtanien

Yes Firmware updated. If you plugged your device in, it will take the settings from your device and fill in Escribe. You need to tick the box under each profile that you want to use "Temperature Dominant" and upload to your device

New Version ! ! Hell yes. Thank you ! Temperature Dominant FTW. Everything awesome so far. My Main device once again !

This board does not use PWM so it does not do what other boards do and pulse like a misfire, in fact it is very smooth and does not ever kick in and out. It rises slightly above and below the set temp quickly and gives a nice smooth vape. Device monitor, when vaping shows this very well. This board does things that others do not do, amazingly. Options not arguments.

this would be true for those of us who use nickel only, i though, use many other wires than nickel, and some wire mixes, in which preheat does not perform well, so i have to keep the preheat turned off. anyone using Ti or SS is most likely not using preheat, and that is a good portion of vapers on here. So therefore, changing wattage on a device with no preheat does make a huge difference[/QUOTE] I don't use Ni200 at all any more. My main wire is 316L. Pre heat works wonderfully. And all my friends do too. I set the wattage at max and control my vape with temp, just like on every other new device out there. I use to use my lower watt devices like you suggest DNA 40 etc... where that small window of available wattage made a difference, but things are different with all the available wattage now. The industry came from a VV to VW stage to temp control. ITs the Evolution of Vaping. Evolve with their original TC devices patented controlling temp with wattage to protect their chips from the clone thieves.(quick and dirty explanation you can check the patent office for more detail) This is why you saw Joule mode on competing devices. The DNA 200 has reached a whole new level. I love my vape quality from my DNA 200 devices. IT is an OPTION you must have to not lose customers. OPTIONS. In temp control mode on a DNA 200, if I set the watts at max, leave all other temp settings at default except temp, the DNA 200 does an AMAZING job. It Punches hard in the beginning, no ramp up time at all and has a SMOOOTH signal limited right at the temp I set. I am running dual 316L, 3mm Clapton coils in my griffin RTA on my Reuleaux DNA 200 right now. Awesome experience. This is not and should not be an argument about vape styles. IF one person says they like doing things one way and some one else likes thing another, so be it !. All I can tell you is what I have seen on an oscilloscope and test equipment. This device does not just limit and pulse (rattlesnake) to the temp limit like the YiHi SX330V3SL, or even the newer chips. It actually gives a nice smooth signal at the set temp. The newer chips coming out are a serious threat. PLEASE stop arguing about "I like it this way so you should have to do it like me". Option people Options.

No matter how you look at it you still need to find the right temperature. To do that you must keep going back and forth to get it right.

I thought that was what we were here for, to test the beta releases before they became official?[/QUOTE] Me too.

^^^^^ ?

I cant wait ! I hope it includes to be able to change temperature in Temp mode ! Maybe even changing TCR on the mod like so many do now. Make the best board even better! Happy New year and thank you for the communication and not abandoning us.

I will +1 another thread for this feature but I don't think it is going to matter. It seems like they have abandoned these forums.

When a new update is made public, it will show up when you start EScribe. Should show up on the bottom left corner in a new box.[/QUOTE] Waiting for approved, tested firmware updates in the Escribe software is the "approved" method, but if you want to try the latest BETA versions then you will have to follow the first post in this thread, and download and install manually. The last beta has been out for a LONG time, and works well, giving many more advanced settings, not sure why it has not been made available via Escribe. While I like the DNA200, and supporting a USA company, I get the feeling their overall company budget does not allow them to hire as many software developers as let's say a Chinese company like Joytech that has pumped out firmware updates, every few weeks, now adding manual TCR input on a $40 mod, vaping right now on both my Vaporshark DNA200, and EVic VTC Mini, very comparable, other then the huge price difference. It seems so far since I've owned my first Evolv product, that they are short, personal wise, the programmers to keep up, and I hope they get it together! My example is the overwhelming demand for the simple swapping of being able to set temperature on the main screen instead of the fairly useless wattage mode for TC vaping. This has been requested for a long time, both on this site, and made a bit of a joke, by almost every online reviewer. Joyetech updated its mods firmware in a few short weeks, with some complicated programming, but we still can't easily change the temperature setting, on our advantced temperature controlled DNA200 devices. Evolv, please hire some more experienced programmers, or lose potential sales to these far less expensive Chinese boards that other then extra software options, still deliver a high quality vape![/QUOTE] I cant agree more whit what you said. My Evic VTC mini is incredible now. All EVOLVE needs to do is a firmware update for the temp option on screen. That, and come by and at least say hello to your supporters. I love supporting a U.S. company but they need to support us too. Hope they get it together. It does not take resources to just stop in and say thank you we are working on things for you or something.

+100. I know a bunch of people that wont even buy a DNA because of this. I would love to see this too. Many reviewers also state that this should be an option and how the RX200 is even a better buy because of ease of use. It is a shame that the best chip in the business right now is hampered by way too many clicks (I know you can set the lock clicks to what ever you want in escribe). Just an FYI I love my DNA 200 devices but it could be better with the choice to show temp and change it like almost every new device in the past few months. I also find my self using my other mods and no longer recommending the DNA 200's. Evolv was also always on top of the firmware and escribe. They haven't done any thing in some time. The software every one is using has sat in the early release stage way too long. Nothing for months .

Technically it's a Beta but everyone's using it; bookmark this page /topic/66731-topic/[/QUOTE] Thanks again. Downloading it now.

2015-10-21 EScribe 1.0.35.2 .. just checked I'm up to date, unless there's an Alpha?![/QUOTE] Mine says 1.0.32 I just downloaded yesterday and I thought this updated automatic ? Where did you get your version ? Your battery tab has a manufacturer back button and a few other different things than mine does.

JAquith. What version of Escribe are you using? I have mine updated but it does not look like yours.

Thank you Jaquith. Going to see how this works compared to mine.