Replay on dna80c with different atomizer

[Millo76]

Hi all,

I own a new box with dna80c and tried 4 different combo boro/rba on it.

With 3 of them when i press fire appears 'Reply Ready' on the screen but with the other one the message don't appear on screen but all works fine anyway, i can vape without problem.

Do you know why this behaviour?

Atoms are build with single wire ka1 or ni70.

Thaks guys.

 

 

[Wayneo]

Sure. Replay works best with a proper TC material like SS.

You are quite lucky to get a 'replay ready' with N70. You must use enough watts or long puff for the mod to be able to capture the puff. I will assume the 4th that does not show 'replay ready' is your kanthal coil with the flattest/lowest change in resistance. 

[Millo76]

1 ora fa, Wayneo ha scritto:

Sure. Replay works best with a proper TC material like SS.

You are quite lucky to get a 'replay ready' with N70. You must use enough watts or long puff for the mod to be able to capture the puff. I will assume the 4th that does not show 'replay ready' is your kanthal coil with the flattest/lowest change in resistance. 

Thanks Wayneo

Yes the atom (Serin Rba) that doesn't show "Replay Ready" has build with ka1 6 wraps 2.5 28 awg, actually the same build on kayfun bb shows the message but has build wit 5 wraps of the same wire.

use 12w for all atom

Edited April 9 by Millo76

[Wayneo]

Do you actually use Replay? enabled after seeing the ready? During testing I vaped a N80 coil and wick perfectly dry with no burn. 30+ puffs from when the rda was dry. I got nic sick thinking it would be much fewer puffs. It never burned/singed the cotton.

[Millo76]

No i never used replay actually, this is my first box with dna80c, maybe will try later.

I was only curious about the behaviour with different atom.

[Millo76]

Ok i want try Replay so i think i can use a dripper that i will build with a NiFe30 Resisterm single wire.

What will happen? When the cotton will dry i am expect that the mod don't fire?

[dwcraig1]

It will slowly throttle down to pretty much no power and no burning of the wick.

[Millo76]

At the moment i am trying replay with ni70 single spaced coil, seems to be works fine... (Set Replay on Allow on unlikely coils and wormth to 1)

Someone has tested Replay with this no tc materials?