stubby 21 aio screen glitching

[nathanmuntz@yahoo.com]

any idea why my dna stubby 21 would be doing this?

[Helomi78]

Hi, I have a new Suicide Mods Stubby 21 Dna60c x-ray edition. It is a new mod, I bought it a week. When I connected it to the escribe application, offered to update the service pack , which I did. I changed the screenshot to what you see now. The problem is the following, which I will also send a video about. When the device returns from a prolonged period of inactivity with a single button press, the screen flashes with white pixels, but otherwise everything is fine. What causes this error? Thank you very much!

Best regards, Peter

 

 

Edited Thursday at 12:34 PM by Helomi78
Attachment added

[Wayneo]

If that pixellation started from before your update, return it to place of purchase.

If it only started after the update, perhaps a 'hard reboot' under escribe - Tools will fix it. If it does not, load a new copy of the firmware.

If you did not mention the update, I would suggest you have a flaky screen that you or the vendor should replace.

[Helomi78]

Okey! Thank you! I will try to hard reset. If that doesn't solve the problem, I'll restore the factory firmware. I did the right thing by backing up the factory default firmware. I'll let you know if the problem is solved! Thx! 👍👌

[Helomi78]

On 7/24/2025 at 4:10 PM, Wayneo said:

If that pixellation started from before your update, return it to place of purchase.

If it only started after the update, perhaps a 'hard reboot' under escribe - Tools will fix it. If it does not, load a new copy of the firmware.

If you did not mention the update, I would suggest you have a flaky screen that you or the vendor should replace.

Hi, I tried it!  I made a hard reboot, but it not solved the screen problem. Than I upload the original saved settings, but it not solved it. Than I made again a hard reboot, and nothing changes. When I push the fire button the Stubby is back from standby mod, and the screen glitching, pixeling a half second, and than everithing is fine. It always do it when is come back from standby mode. Is it normal and do not need to interest with it? Or I need to contact to seller (SAV)?

[Helomi78]

I upload back to the Stubby this Firmware Version: 1.1 SP75 INT, and I testing it now!

If I remember correctly, the error occurred after I updated to this: The new Firmware Version: 1.1 SP84 INT

But I am not sure.

[Helomi78]

👆It is not solved the problem!

[Wayneo]

Thanks for the updates.

On 7/24/2025 at 10:10 AM, Wayneo said:

... I would suggest you have a flaky screen that you or the vendor should replace.