taylord22 Posted October 24, 2018 Report Share Posted October 24, 2018 Hey everyone...having a couple of issues with the Orion. The .25 coils have been a completely bipolar experience for me, and neither has been positive. I'm either getting really burnt hits, or, really weak hits. Went into the settings and reduced boost and tinkered around with Warmth. I've gotten about 60% to the hit that I want, but, the device cuts out (even when not on REPLAY) before I can get anything satisfying; therefore, I haven't even gotten to a point where I've wanted to "replay" any hit. My questions: Is the DNA GoBoard set to cut out after so many seconds? If so...any way to change? If it's not, and I'm positive REPLAY is not on, any ideas? A setting that I'm not realizing might be governing the effect? Also curious about any similar experience with the ORION vape experience and what people have done to solve Best settings I've been able to come up with (after tinkering with both profiles). Not looking for a "hot vape", just a warm one. 100% of my pulls have been "cold". Wicking hasn't been great, but I don't think it's the driver of my problem (despite getting burnt hits when using default settings). Link to comment Share on other sites More sharing options...
Wayneo Posted October 24, 2018 Report Share Posted October 24, 2018 17 minutes ago, taylord22 said: The .25 coils You might want to upgrade your firmware. The .25 is the DL coil, not the MTL coil. The Max Puff Time limit is under the 'Safety' tab. Cheers. Link to comment Share on other sites More sharing options...
Rob Wigglezz Posted October 26, 2018 Report Share Posted October 26, 2018 Replay hasn't been working to well for me in Michigan. I know replay basically remembers and repeats the coil resistance of when you set it, I'm just wondering if the device getting warm from my pocket and cold from using it outdoors screws with it. Replay is only consistent for me if I set it indoors and never put it in my pocket or go outside. Link to comment Share on other sites More sharing options...
Monir Posted January 25, 2019 Report Share Posted January 25, 2019 On 10/24/2018 at 8:05 PM, Wayneo said: You might want to upgrade your firmware. The .25 is the DL coil, not the MTL coil. The Max Puff Time limit is under the 'Safety' tab. Cheers. Hi i didnt find the safety tab please help Link to comment Share on other sites More sharing options...
Monir Posted January 25, 2019 Report Share Posted January 25, 2019 On 10/24/2018 at 7:45 PM, taylord22 said: Hey everyone...having a couple of issues with the Orion. The .25 coils have been a completely bipolar experience for me, and neither has been positive. I'm either getting really burnt hits, or, really weak hits. Went into the settings and reduced boost and tinkered around with Warmth. I've gotten about 60% to the hit that I want, but, the device cuts out (even when not on REPLAY) before I can get anything satisfying; therefore, I haven't even gotten to a point where I've wanted to "replay" any hit. My questions: Is the DNA GoBoard set to cut out after so many seconds? If so...any way to change? If it's not, and I'm positive REPLAY is not on, any ideas? A setting that I'm not realizing might be governing the effect? Also curious about any similar experience with the ORION vape experience and what people have done to solve Best settings I've been able to come up with (after tinkering with both profiles). Not looking for a "hot vape", just a warm one. 100% of my pulls have been "cold". Wicking hasn't been great, but I don't think it's the driver of my problem (despite getting burnt hits when using default settings). Hi can you please tell me ur experience i am facing the same issue Is the DNA GoBoard set to cut out after so many seconds? If so...any way to change? and i didnt find the safety tab to prolong the puff time. Link to comment Share on other sites More sharing options...
Simon23484 Posted July 13, 2019 Report Share Posted July 13, 2019 Hi. I've found the safety tab but have no options to increase puff time. Anyone help please. Link to comment Share on other sites More sharing options...
Wayneo Posted July 13, 2019 Report Share Posted July 13, 2019 @Simon23484 Are you running the latest software/firmware? Link in my sig just in case. Link to comment Share on other sites More sharing options...
Simon23484 Posted July 13, 2019 Report Share Posted July 13, 2019 Hi. I believe so. Just connected to escribe and but the update on it recommended. Link to comment Share on other sites More sharing options...
Simon23484 Posted July 13, 2019 Report Share Posted July 13, 2019 It's just blank under the safety tab. Link to comment Share on other sites More sharing options...
Wayneo Posted July 13, 2019 Report Share Posted July 13, 2019 Try this. Options (menu bar) -> User Interface -> Manufacturer Link to comment Share on other sites More sharing options...
Simon23484 Posted July 13, 2019 Report Share Posted July 13, 2019 Lol. Yes just found that myself. Thanks buddy. Link to comment Share on other sites More sharing options...
Simon23484 Posted July 13, 2019 Report Share Posted July 13, 2019 Have to say the device is amazing. Took me a couple of pods to get it right but once you do it's bloody brilliant. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now