lukeskywalker Posted July 31, 2018 Report Share Posted July 31, 2018 im using a1 khantal,my ohm jumping while im firing.say before im firing my ohm shows 1.330 while firing for 3 secs it turns to 1.269, 1.267, 1.264, 1.265. after release firing button it comes back to 1.330 Link to comment Share on other sites More sharing options...
lukeskywalker Posted July 31, 2018 Author Report Share Posted July 31, 2018 p1.ecigprofile Link to comment Share on other sites More sharing options...
lukeskywalker Posted July 31, 2018 Author Report Share Posted July 31, 2018 (edited) my atomizer profile doesnt stay at one value its move from 1.3x to 1.29x to 1.28x . Edited July 31, 2018 by lukeskywalker Link to comment Share on other sites More sharing options...
retird Posted July 31, 2018 Report Share Posted July 31, 2018 Was the atty warm from use when you put it on the device and told it was new coil? You might try building a new coil.... put it in a cool atty that hasn't just been used..... put on device and run Analyzer then fire....when asked select New Coil..... vape a bit.... what are your results??? Link to comment Share on other sites More sharing options...
lukeskywalker Posted August 1, 2018 Author Report Share Posted August 1, 2018 Here is my results. anything wrong with it? 1E0390D8-B6D1-43D8-B966-98A9DB497FA7.MOV Link to comment Share on other sites More sharing options...
retird Posted August 1, 2018 Report Share Posted August 1, 2018 So what do you get while firing? Link to comment Share on other sites More sharing options...
lukeskywalker Posted August 1, 2018 Author Report Share Posted August 1, 2018 Here details while firing and the profile Link to comment Share on other sites More sharing options...
retird Posted August 1, 2018 Report Share Posted August 1, 2018 This just could be that you are seeing Cold ohms from Atty Analyzer whereby when using atty analyzer it slightly warmed the atomizer giving the Cold ohms. In use it reads live ohms thus the drop.... I had to dig up a Kanthal coil to see how it reacts as I seldom use Kanthal. My Kanthal coils show the same thing.... Here is my screenshot using a DNA250C device with a pre-made coil head rated at 0.60 ohms........ Link to comment Share on other sites More sharing options...
lukeskywalker Posted August 1, 2018 Author Report Share Posted August 1, 2018 So there is nothing to worry ya. I think maybe its because of theme used. And also whenever i check the atomic analyzer. The value doesnt stop. It changing and changing. Thats my concern Link to comment Share on other sites More sharing options...
retird Posted August 1, 2018 Report Share Posted August 1, 2018 Good.... yep the longer you run the analyzer the numbers will climb because the analyzer slightly heats the atty.... glad we got to the bottom of your concern... Link to comment Share on other sites More sharing options...
lukeskywalker Posted August 1, 2018 Author Report Share Posted August 1, 2018 Thanks for your time. Much appreciated. Vape on! Link to comment Share on other sites More sharing options...
lukeskywalker Posted August 4, 2018 Author Report Share Posted August 4, 2018 another one ,why i cant use replay in wattage mode. No save puff appeared Thanks Link to comment Share on other sites More sharing options...
retird Posted August 4, 2018 Report Share Posted August 4, 2018 Replay does not work with Kanthal nor does Kanthal work in Temperature Control mode. To use Replay you need to use a wire material that can be used in Temp Control mode.....such as Nickel 200, SS 316, SS 316L, Titanium, and etc..... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now