DNA 75C: Incorrect indication of the battery charge level.

[tramog]

Nothing serious ... but on my box with DNA 75C known that the battery charge level stops at 98-99%, never ever 100%. It also happens to me if I insert batteries previously charged with an external battery charger. Performed the "battery test" for both batteries (Samsung 25R and Sony VTC5A) ... nothing, the boxes signal me to charge battery (green led) and 98% charge level. Does it happen to you too?

[David247]

HI tramog

My vt75c dose the same

[BENNIE]

anyone found a fix for this yet? My battery percentages jump around like its on a trampoline..........pretty annoying

[konczmiklos@hotmail.com]

 battery charge level stops at 98-99%,That's my problem!

[mjordan79]

Happens to me too. I have a Basen Black 4500mAh 26650. After a full charge using a Nitecore D2, the box shows "96%" with a fully charged battery.
I have also imported the Basen profile that can be downloaded somewhere in this forum.

[dmc1969]

On 2/9/2018 at 4:07 PM, BENNIE said:

anyone found a fix for this yet? My battery percentages jump around like its on a trampoline..........pretty annoying

mine does the same, let me know if you find a fix

[Stephenfr]

Hi,

same issue for me on a mirage (lost vape) with ijoy 20700 batteries (the 5 legged ones).

when freshly charged using a nitecore D4, I am getting a 97% charge indicator on the mod, and when charged via usb, the battery indicator never reaches 100%.

I’m interested in a fix for that too !

 

 

[RictusGrin]

Same here. Full = 97%

I’m sure Evolv is going to fix it eventually. 

[konczmiklos@hotmail.com]

Panel hibás ,akkumlátor ok! 

[konczmiklos@hotmail.com]

In EScribe go to the mod tab and change your discharge profile so that the point for 100% has whatever voltage those cells measure when fully charged.  If your mod still shows 99% or something, reduce the voltage value for 100% by 0.01V.

[Badnews69]

The above post is correct  hook your 75c BF up to EScribe  then go to MOD then go to battery and change the voltage on the graph that's at 100%. Mine was at 4.20v and I changed it to 4.19V. Your problem solved. Look all the way to the left 4.19v. After you make the change Upload Setting To Device.