hdv111 Posted October 24, 2017 Report Share Posted October 24, 2017 I've used DNA's for quite some time now. A few days ago one of them started doing weird about percentages of charge. I hooked it up to my computer to recharge it, but I'm still in doubt about the cells being imbalanced. Should I be worried? Any advice is welcome, thanks in advance. (This is while recovery charging by the way) Link to comment Share on other sites More sharing options...
Wayneo Posted October 24, 2017 Report Share Posted October 24, 2017 Over on the left, Cell 1 is .04v lower. That's pretty cool with only 2 non-TC puffs, I've got one mod with I think only 1 non-TC. 2 Link to comment Share on other sites More sharing options...
hdv111 Posted October 24, 2017 Author Report Share Posted October 24, 2017 1 uur geleden zei Wayneo: Over on the left, Cell 1 is .04v lower. That's pretty cool with only 2 non-TC puffs, I've got one mod with I think only 1 non-TC. Thank you very much. Is this something that can be fixed? And how should it be prevented? It's done charging now. Cell one is 0.08v lower now than 2&3. Link to comment Share on other sites More sharing options...
Wayneo Posted October 24, 2017 Report Share Posted October 24, 2017 If you vape your mod down, during charging, it might bring all 3 back to the same voltage over time. Leaving those same checkboxes ticked, you can vape it and see if Cell 1 sags more than #2 and 3. Having 'pack' ticked you can undo for less clutter. Do you remember what the lowest cell voltage was when you started? 1 Link to comment Share on other sites More sharing options...
hdv111 Posted October 24, 2017 Author Report Share Posted October 24, 2017 4 minuten geleden zei Wayneo: If you vape your mod down, during charging, it might bring all 3 back to the same voltage over time. Leaving those same checkboxes ticked, you can vape it and see if Cell 1 sags more than #2 and 3. Having 'pack' ticked you can undo for less clutter. Do you remember what the lowest cell voltage was when you started? The lowest was yesterday I think. Sadly I don't remember exactly. It was 0.2 down compared to the others, it never dropped extreme anyway. Let's say it was 3.8 compared to 4 & 4 when I noticed. The weird thing is: I use a wallcharger with 4 USB ports. In 3 of those 4 ports I charge my DNA's. When I checked the other two (aside from this one) they were also unbalanced. But a quick recovery charge fixed the other ones within an hour. Only this one I really have trouble with after 12 hours of charging it's still 0.08 down on the others. Link to comment Share on other sites More sharing options...
Wayneo Posted October 24, 2017 Report Share Posted October 24, 2017 Sometimes you have to do a recovery charge multiple times to get them all back. Vape it down, then recovery charge if you wish? Is it a Lipo battery? I could go way out on a limb but then you'd think I was whacked. 1 Link to comment Share on other sites More sharing options...
hdv111 Posted October 24, 2017 Author Report Share Posted October 24, 2017 Zojuist zei Wayneo: Sometimes you have to do a recovery charge multiple times to get them all back. Vape it down, then recovery charge if you wish? Is it a Lipo battery? I could go way out on a limb but then you'd think I was whacked. It's a LiPo (Lavabox DNA 200). I kinda got spooked checking them all and finding those voltages. The weird part is that they were all unbalanced. What kind of unbalancing is "normal"? Link to comment Share on other sites More sharing options...
Wayneo Posted October 24, 2017 Report Share Posted October 24, 2017 (edited) Nice, see right now you don't think I'm whacked. Escribe - general tab - get information. When was that board programmed? And can you do a printscreen .......... while firing. Normally, I only see like a +/- .01 on a new fresh Lipo, if it all, during firing. Edited October 24, 2017 by Wayneo 2 Link to comment Share on other sites More sharing options...
hdv111 Posted October 24, 2017 Author Report Share Posted October 24, 2017 (edited) Production History Tuesday, August 30, 2016, 3:47 PM Board programmed @Wayneo There you go Edited October 24, 2017 by hdv111 Forgot something Link to comment Share on other sites More sharing options...
Wayneo Posted October 24, 2017 Report Share Posted October 24, 2017 I don't work in the industry, so now I'll go out on a limb. I thought it was interesting to see a 200 with such so low puffs. It smelled like a Lipo, from your post. You verified a 14 month from board programming. Here comes the jump. Volcano had a big sale and either had a crap load of boards and batteries sitting there or already assembled for a long time. Nothing you can do to prevent the imbalance. It could just be an old battery. 1 Link to comment Share on other sites More sharing options...
hdv111 Posted October 24, 2017 Author Report Share Posted October 24, 2017 1 minuut geleden zei Wayneo: I don't work in the industry, so now I'll go out on a limb. I thought it was interesting to see a 200 with such so low puffs. It smelled like a Lipo, from your post. You verified a 14 month from board programming. Here comes the jump. Volcano had a big sale and either had a crap load of boards and batteries sitting there or already assembled for a long time. Nothing you can do to prevent the imbalance. It could just be an old battery. Yeah I bought the LavaBox because of looks. I'm very careful with it. It never leaves my vaperoom and it barely gets used (hence the low puff count). You still think I can atleast fix it by recovery charging? Just vape it empty everyday and recovery charge through the night? Or leave it on charger for a week. I bought it early july this year. So yes it's has been sitting for a long time, when I got it the cells were quite healthy looking though. This screenshot is from my daily vape, as you see it's alot better. Link to comment Share on other sites More sharing options...
Wayneo Posted October 24, 2017 Report Share Posted October 24, 2017 Meh. Recovery charging stops/times out. Just put it in regular rotation and charge it. I don't charge anything overnight. 1 Link to comment Share on other sites More sharing options...
hdv111 Posted October 24, 2017 Author Report Share Posted October 24, 2017 Zojuist zei Wayneo: Meh. Recovery charging stops/times out. Just put it in regular rotation and charge it. I don't charge anything overnight. If in the end I'm not able to fix it it's just a good reason to get the expansion pack right? Lol Link to comment Share on other sites More sharing options...
Wayneo Posted October 25, 2017 Report Share Posted October 25, 2017 Charge and discharge before rushing out for an expansion pack. Can you source the housing and battery seperately. 1 Link to comment Share on other sites More sharing options...
hdv111 Posted October 25, 2017 Author Report Share Posted October 25, 2017 5 minuten geleden zei Wayneo: Charge and discharge before rushing out for an expansion pack. Can you source the housing and battery seperately. Thank you anyway! I know alot more now. I have 2 DNA's on their way as we speak (business relationships) so I don't mind spending a buck on them, as I usually get them free anyway. Thank you very much for clarifying alot of things. As of now I do not have any other questions left. I will post in here when I fixed it. 1 Link to comment Share on other sites More sharing options...
Wayneo Posted October 25, 2017 Report Share Posted October 25, 2017 (edited) My lowest and highest. LOL. Edited October 25, 2017 by Wayneo 1 Link to comment Share on other sites More sharing options...
hdv111 Posted October 25, 2017 Author Report Share Posted October 25, 2017 1 minuut geleden zei Wayneo: My lowest and highest. LOL. Nice. How many puffs can a normal DNA200 survive? I have just ordered coils for 5 years in advance. So atleast one of 3 DNA's should survive that Link to comment Share on other sites More sharing options...
Wayneo Posted October 25, 2017 Report Share Posted October 25, 2017 No idea on the boards. I read a pretty ridiculously high value once on button actuations. That ~90K puffs was my 1st. (a 200), and with a rumoured crappy 510 and substandard wiring still looks and operates perfectly. I had standardized on 1 tank and ended up with 3 of the same. They still work, but sit dusty as I could no longer find SS coils. I never was a dripper, but use 2 just for flavour testing as I've DIY'ed my own e-liquid since week 3. My favorite atty's are a Kayfun 5 and the Ammit 25, so I wrap my own SS 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now