Chief Grey Bear Posted July 24, 2017 Report Share Posted July 24, 2017 I just received my Think Vape Finder DNA250 but the instruction manual is horrible for the device. I have it on Profile3 for S.S.316L but only the ohms are registered until I hit the fire button then the volts and amps are displayed but only then. No matter where I set the temp 1 second after I hit the fire button the screen read OFF instead of displaying the temp but continues to fire. Kind of glad I'm using S.S.316L because if it was Ni200 or Ti I'd be worried TC is turning off and not functioning. Any info would be appreciated. I have no issues with my DNA75 Color functions beautifully. Link to comment Share on other sites More sharing options...
67exec Posted July 24, 2017 Report Share Posted July 24, 2017 The volt and amp readings on-screen are live l, so they will only show while firing. You're kicking out of tc sounds like a hot spot on a coil, or a connection issue between the board and the coil. Do you have EScribe? A device monitor screenshot would help a bunch. Make sure that power, set temp, live temp, cold ohms, and live ohms are all checked for your screen shot. 1 Link to comment Share on other sites More sharing options...
Chief Grey Bear Posted July 25, 2017 Author Report Share Posted July 25, 2017 At the moment I don't have access to eScribe. With that list of items for a screen shot I'm going to need to study up on the Evolv DNA chip to even know what all of that is your even talking about. The Think Vape Finder manual has no info concerning anything like that. I will go the the Evolv site to learn more about the board clearly this is mandatory in my understanding of what I'm dealing with. Thank you for your time and assistance. 1 Link to comment Share on other sites More sharing options...
67exec Posted July 25, 2017 Report Share Posted July 25, 2017 (edited) Great video, applies to your finder also. Controls or "Gestures" start around the 15min mark. Last 2 videos are about EScribe. There have been a ton of interface changes, but the functionality is the same, and device monitor operates the same except for a change up in the menus to to apease the Mac folks. Good luck, and there are no stupid questions. The dna 40, 60, 75, 200 and 250 are a steap learning curve coming from a 75c, but pretty simple once you use it a bit Edited July 25, 2017 by 67exec Spelling Link to comment Share on other sites More sharing options...
Chief Grey Bear Posted July 25, 2017 Author Report Share Posted July 25, 2017 Thank you your a good and helpful person. Appreciate your assistance the DNA75C seems to have a easier menu system haven't had any problems with that one with anything. Have a great day/evening again thank you. Link to comment Share on other sites More sharing options...
Chief Grey Bear Posted July 25, 2017 Author Report Share Posted July 25, 2017 67exec... Thank you for all of your help have the basic controls down now. The owners manual for the Think Vape Finder DNA250 leaves a lot to be desired but know now how to set the basic parameters for use. I am still not able to transfer the eScribe software yet, need to get an MicroSD card to transfer the file from my other phone to my PC. This phone and MicroSD card is encrypted a professional necessity so can't use either but getting closer to my goals at least. Link to comment Share on other sites More sharing options...
Marco.Zaki Posted July 27, 2017 Report Share Posted July 27, 2017 Hello All I have got finder 167 with dna250 chip I updated it on escribe but i lost it's settings by restoring it to default DNA settings and i can't find the settings online. 1- could anyone share with me the default settings for this mod ? 2-the mod power is decreasing to half while the battery @ 30% ? Link to comment Share on other sites More sharing options...
67exec Posted September 1, 2017 Report Share Posted September 1, 2017 @Chief Grey Bear how did you come out on this? Link to comment Share on other sites More sharing options...
Chief Grey Bear Posted September 1, 2017 Author Report Share Posted September 1, 2017 16 minutes ago, 67exec said: @Chief Grey Bear how did you come out on this? It was just another learning experience, the way the DNA vapes is different than alot of other chips I think and after learning that it all worked out it was just user inexperience lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now