KYG Posted June 16, 2017 Report Posted June 16, 2017 Need some help guys. I was recently given a Epetite DNA 60 mod and I've noticed the resistance is somewhat lower than the coil should be running. I've inserted a 7 wrap 2.5mm 28g kanthal coil on my kayfun 3 mini and have only gotten 1.07 ohms. On my DNA200 it is reading 1.31 ohms. Provari showing 1.2ohms. Can anyone here be kind enough to share the factory firmware so I am able to get it to work properly? I don't have a copper/ brass 510 pin to calibrate the device. Let me know if I'm missing something. Thanks.
giz_60 Posted June 16, 2017 Report Posted June 16, 2017 The factory .ecig file from Lost Vape for the Epetite 60 is the same as for the Esquare 60....Lost_Vape_Esquare_DNA_60.ecig 1
KYG Posted June 16, 2017 Author Report Posted June 16, 2017 Thanks. I will try it out first and see if it helps. Read quite a few people was complaining about the device pushing higher ohms but mine is lower instead.
KYG Posted June 16, 2017 Author Report Posted June 16, 2017 Loaded the file. It didn't help with the lower ohm read. Wonder what could be the problem. Anyone can help in this area?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now