Lost Vape Efusion battery

[JLWells1013]

Ok, so I just got this device and I'm unsure exactly what battery option to choose in the software. I've watched a few reviewers of the device and all they touch on is how to change the watt hours. All it says in the user manual is that it's a FullyMax 1300mah 3S Lipo battery. Do I select lithium polymer in the software?

[VapingBad]

Yes, LiPo and put 1300 mAh with 11.1 V in the What hour calc, but I think there is an official settings file for these, yes see https://forum.evolvapor.com/topic/67562-topic/

[JLWells1013]

Thanks! And, I've uploaded those settings. I just wanted to make absolutely certain everything was entered in properly. One more question, though. Is there a reason why the device would not be asking me if I'm attaching a new atomizer? I mean, it's asked me maybe three times since I got which was December 23rd, and I've attached and reattached two different atomizers several times and the screen simply doesn't prompt me. I have profiles set up for both atomizers, of course, but with one of them being a nickel coil, I feel like it should ask me. Also, it will fire the nickel coil in power mode if I do not manually switch to temp mode. Is that supposed to happen?

[VapingBad]

If it can be sure it it a new atty it does not ask, if the res is close it will, you can change how close on the mod tab in EScribe.

[JLWells1013]

Thank you for your help!

[VapingBad]

You are welcome

[JLWells1013]

By the way, the mod resistance is set at 0.006 and the atomizer is 0.21. Should it be prompting me?

[JLWells1013]

And about it firing a nickel coil in power mode...should it switch to temp automatically?

[Rcarter]

There is no such thing as "power mode" on the 200. Unless you have the temperature limit set to "off", it will automatically detect and start measuring temperature when it detects on is attached.