NewMexicoGuY Posted April 4, 2016 Author Report Share Posted April 4, 2016 starts fast pauses at 60 watts and 70 then another time before 200 watts what causes this? took battery cover off made sure plugs are seated and connected and they are.... so confused mod is new just upgraded the battery from 900 to 1300 mah upgrade from lava box and set csv to what lava box recommended and everything driving me nutsLavaBox dna 200 Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted April 4, 2016 Report Share Posted April 4, 2016 this happened when you did the larger lipo conversion? does it do the same start and pause if you use the 'simulate button press' located in device monitor, from escribe? try a soft, then a hard reboot. what version of escribe are you running? in the 'recommended' version of escribe, there is a 'look and feel' section at the bottom of the 'theme' page in escribe labeled 'watts press increment' and 'watts hold increment'. try adjusting those to your liking Link to comment Share on other sites More sharing options...
NewMexicoGuY Posted April 4, 2016 Author Report Share Posted April 4, 2016 I have the most recent version of escribe not sure if it did it with 900 mah battery didn't notice gonna boot pc up now and try simulated button then soft reset if that don't fix Link to comment Share on other sites More sharing options...
NewMexicoGuY Posted April 4, 2016 Author Report Share Posted April 4, 2016 ok weird stuff set watt increment to 1.0 doesn't do weird pause but all other settings it does the pause thing Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted April 4, 2016 Report Share Posted April 4, 2016 when you say other settings, what do you mean? temp increment scrolling? i'm not sure what else besides watts and temp there would be a pause for. give me some more details on what else is acting strangely......... Link to comment Share on other sites More sharing options...
NewMexicoGuY Posted April 4, 2016 Author Report Share Posted April 4, 2016 It was watts changed it in mod feel 1.0 and it stopped the pause thing haven't tried in temp yet but anything below the 1.0 increment on wattage it does the pause Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted April 5, 2016 Report Share Posted April 5, 2016 what version of escribe are you running? i'm trying to recreate on my vt200 what you're describing and cannot. maybe you're just not holding down the + or - button hard enough (your press is intermittent at times rather than a steady press?). is it only happening when scrolling up or down in watts? or both? Link to comment Share on other sites More sharing options...
NewMexicoGuY Posted April 5, 2016 Author Report Share Posted April 5, 2016 Tried hard press still does it Link to comment Share on other sites More sharing options...
Spector NS5 RD Posted April 6, 2016 Report Share Posted April 6, 2016 i'm outta ideas. if anyone else has some theories as to why this is happening, feel free. i'd say if whole watt increments cure the pauses, when selected in escribe, just role with that.or open a help ticket from evolv's website. Link to comment Share on other sites More sharing options...
dylang919 Posted April 21, 2016 Report Share Posted April 21, 2016 All 6 of my DNA 200'S do some weird pause thing when scrolling thru the watts, every since I upgraded to the newest escribe software. Link to comment Share on other sites More sharing options...
.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now