DNA75 Solidworks, IGES, and STEP files

[tennisguru1]

Nothing seems to work, just going around in circles.

Can I just make all the profiles the sai?

Why isn't this grrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrr

[tennisguru1]

Is there another way?

Is it me ?

This is a nightmare for something so basic.

I feel like a dumb chit!

[dwcraig1]

If you know  the heating element material use that and enter the other values such as wattage, ect by hand ....and upload settings.

What material is the heating element?

[tennisguru1]

nichrome or nickel 200 

You can see the .csv i sent is an excell page

I really wanted to learn this, is this evolve really this bad?

 

[tennisguru1]

I am trying to understand this.

I have the settings, why won't the program not taking its own file?

What was the other way to do this?

Material ? 

[dwcraig1]

Nichrome has no resistance change from cold to hot so the board can't figure temp, Ni200 (pure nickle) has a very large increase in resistance. If you are using Nichrome simply set desired wattage and that's it.

[tennisguru1]

It's nickel and I think problem is its looking for a  .ecigprofile & I have a .cvs

This should have a simple upload .csv function if that's what it wants.

This is so easy to TC on every mod but Evolves?

I wish I could learn what I an doing wrong, but this software is anti intuitive.

I feel like a complete idiot.

 

Sai Donut.csv

Sai.ecigprofile

[dwcraig1]

Under "File/ Open", choose .ecig file and upload settings.

[dwcraig1]

Or just use nickle as your material and set the rest manually

DNA200-Nickel_Ni200_(linear_TCR)-SteamEngine.csv

[tennisguru1]

Nice, I did that and all it shows is the original volcano ecig file

.csv is invisible and so is other ecig files

[tennisguru1]

That's alright .

I give up.

This just isn't worth it.

Stock firmware is ok on the Lavabox m, but without precise TCR or TRF I am going backwards.

I'm going to give this away to a friend who thinks pulsing wattage mode is vaping.

I'm going to get rid of this evolve and go back to artic fox and red panda.

It just works, this is the clunkiest firmware I ever saw.

You are the best help I ever had, not your fault, this evolve is  a junk cludge  interface and ruins whatever advanced hardware is there to use.

I was part owner of Computer World in Las Vegas and we would never release or work with such bad undocumented  firmware as this.

Maybe after a good nights sleep ... but I doubt it, just doesn't work well or simply.

I see why so few use it even that it has better hardware behind it.