Lost Vape Efusion not working

[dhackwrench]

Hello! I am sorry for bad english . My Mod included stopped when the battery is inserted( black screen) , but when connecting it to a computer via USB, it is switched on and write error Check Atomizer. What do I do , please help . Thank you. I am from Russian Federation.

[Spector NS5 RD]

Hi dhackwrench......  can you post a screen shot of device monitor with all of the "Battery" options checked. let's see what your cell voltages are at. it will connect to escribe with the lipo battery installed, right?

[dhackwrench]

  ChunkyButt200 said:

Hi dhackwrench......  can you post a screen shot of device monitor with all of the "Battery" options checked. let's see what your cell voltages are at. it will connect to escribe with the lipo battery installed, right?

Expand  

lipo battery and 2x18650 and not working
 

[VapingBad]

That looks like the batteries were empty and are now charging OK, wait until the battery is over 10.5 V with the cell voltages of 3.5 V and check again.

[dhackwrench]

  VapingBad said:

That looks like the batteries were empty and are now charging OK, wait until the battery is over 10.5 V with the cell voltages of 3.5 V and check again.

Expand  

thanks, but 18650 is fully charger and mod not working. Now charge the mod , the voltage drops from 0.96 to 0.10 and back. also can't remember the percentage of battery.    

[VapingBad]

It could be the fuse then, it is not part of the charge circuit.

[dhackwrench]

  VapingBad said:

It could be the fuse then, it is not part of the charge circuit.

Expand  

But if it's a fuse, then the charge would not have been? right?

[VapingBad]

  dhackwrench said:

But if it's a fuse, then the charge would not have been? right?

Expand  

No the balance connections are not fused so the charger and battery management are connected, it's just the main high current connection that is fused.

[dhackwrench]

  VapingBad said:

No the balance connections are not fused so the charger and battery management are connected, it's just the main high current connection that is fused.

Expand  

thanks, that is broken a fuse?

[VapingBad]

Look at these threads they should show how to confirm it's the fues and how to change it, but I would recommend returning it to the manufacturer or Evolv for that.

https://forum.evolvapor.com/topic/67186-topic/

https://forum.evolvapor.com/topic/68133-topic/

https://forum.evolvapor.com/topic/66901-topic/

[Spector NS5 RD]

if the fuse is blown the charging circuit will dump it's charge into a Transient Voltage Diode. to protect the dna board. your screen shot is blurry. what is pack voltage and cell voltage when you are using 2 18650's?  

[brunomdoss]

Hi. I have the some problem. Already know how to fix the problem?