benpui Posted March 28, 2017 Author Report Posted March 28, 2017 Hi all, i have a problem with my VT133. im using fully charged pair of LG Hg2. i did the latest firmware upgrade and setup the battery in escribe but when i vape , the voltage is inconsistently going up and down in power mode and wattage goes from 35w down to 24w and up again. i got a dual kanthal coil 28g @ 0.58ohm setup in my atty. am i doing something wrong in escribe?? also when i lower down the wattage to 30w , the voltage is stable. i am confused
Spector NS5 RD Posted March 28, 2017 Report Posted March 28, 2017 benpui said:Hi all, i have a problem with my VT133. im using fully charged pair of LG Hg2. i did the latest firmware upgrade and setup the battery in escribe but when i vape , the voltage is inconsistently going up and down in power mode and wattage goes from 35w down to 24w and up again. i got a dual kanthal coil 28g @ 0.58ohm setup in my atty. am i doing something wrong in escribe?? also when i lower down the wattage to 30w , the voltage is stable. i am confusedcan you post a screenshot of device monitor while firing the mod?
giz_60 Posted March 28, 2017 Report Posted March 28, 2017 benpui said:Hi all, i have a problem with my VT133. im using fully charged pair of LG Hg2. i did the latest firmware upgrade and setup the battery in escribe but when i vape , the voltage is inconsistently going up and down in power mode and wattage goes from 35w down to 24w and up again. i got a dual kanthal coil 28g @ 0.58ohm setup in my atty. am i doing something wrong in escribe?? also when i lower down the wattage to 30w , the voltage is stable. i am confusedAnd...what kind of atty are you using?
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 im using an OBS crius plus. here a gif file of the monitor when im firing it. when i switch to another atty , its does the same thing. and also i rewrapped both of my LG hg2 once
giz_60 Posted March 28, 2017 Report Posted March 28, 2017 benpui said:im using an OBS crius plus. here a gif file of the monitor when im firing it. when i switch to another atty , its does the same thing. and also i rewrapped both of my LG hg2 once CB was referring to a screen shot of 'Device Monitor' in Escribe...not of your device!! Can't tell anything from that....
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 oh sorry! thought you meant the monitor of the mod.
giz_60 Posted March 28, 2017 Report Posted March 28, 2017 Device Monitor is showing 3 cells when it is a 2 cell device..in the 'Mod' tab, make sure it is set for 2 cells & upload to device... see if that helps...
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 giz_60 said:Device Monitor is showing 3 cells when it is a 2 cell device..in the 'Mod' tab, make sure it is set for 2 cells & upload to device... see if that helps... i tried it . it still showing 3cell @ 1.10v and fire inconsistent voltage
giz_60 Posted March 28, 2017 Report Posted March 28, 2017 You changed/posted a different screenshot...can you post another with the ONLY the following boxes checked...pack,cell1,cell2,power,power set,cold ohms,live ohms.
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 giz_60 said:You changed/posted a different screenshot...can you post another with the ONLY the following boxes checked...pack,cell1,cell2,power,power set,cold ohms,live ohms. ok got it. i updated escribe to 1.2 SP5
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 giz_60 said:While firing please... ok got it
giz_60 Posted March 28, 2017 Report Posted March 28, 2017 In the mod tab, set your 'Cell Soft Cutoff' to 2.8v...looks like you either have a weak cell (#1) that is hitting the cutoff, or you have a battery connection issue....might want to try a new set of batteries & keep them married...
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 giz_60 said:In the mod tab, set your 'Cell Soft Cutoff' to 2.8v...looks like you either have a weak cell (#1) that is hitting the cutoff, or you have a battery connection issue....might want to try a new set of batteries & keep them married... thanks very much for patience and your help ! i might have damage the battery due to over heating the battery with the wrap. I'll purchase a new set of battery for it.
giz_60 Posted March 28, 2017 Report Posted March 28, 2017 You will notice in the last screen shot, the wattage starts to drop off when cell #1 is hitting the 3.09 level...setting the cell soft cutoff to 2.8v will help, along with a new set of batteries...keep them married so that they drain & charge together...
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 giz_60 said:You will notice in the last screen shot, the wattage starts to drop off when cell #1 is hitting the 3.09 level...setting the cell soft cutoff to 2.8v will help, along with a new set of batteries...keep them married so that they drain & charge together...
benpui Posted March 28, 2017 Author Report Posted March 28, 2017 giz_60 said:You will notice in the last screen shot, the wattage starts to drop off when cell #1 is hitting the 3.09 level...setting the cell soft cutoff to 2.8v will help, along with a new set of batteries...keep them married so that they drain & charge together... i asked my friend if i could test out his batteries out on my mod and its working correctly. i will indeed buy a fresh set of batteries. thanks alot for solving my issue! appreciate it alot
giz_60 Posted March 28, 2017 Report Posted March 28, 2017 benpui said: i asked my friend if i could test out his batteries out on my mod and its working correctly. i will indeed buy a fresh set of batteries. thanks alot for solving my issue! appreciate it alot
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now