Therion DNA 250 Ignition Without Atomizer Problem

[elvinyilmaz]

Help please

https://vimeo.com/216068430
https://vimeo.com/216068451
https://vimeo.com/216068494

[VapingBad]

It seems to be reading the ohms far too low, unless you have a big Ni coil then I would stay >= 0.05 ohm, if not Ni check the mod resistance is not set over 0.01 on the mod tab in EScribe.

[elvinyilmaz]

The problem continues

[Tubbyengineer]

You need to put on a known NON TC atomiser and run the atomiser analyser - it appears you are getting a short on the 510 - either from the atomiser - or more likely from a faulty or dirty 510 on the mod.

Run the atomiser analyser with the known NON TC atomiser, and then without an atomiser - You should get just a ? without an atomiser, and close to the known reading for the NON TC coil, If you get anything other than the ? with no atomiser then the fault is within the mod and is a short either in the 510 or the wiring leading to the 510.