zark
-
Posts
412 -
Joined
-
Last visited
-
Days Won
24
Content Type
Profiles
Forums
Downloads
Posts posted by zark
-
-
1 час назад, Lanzarotechris сказал:
All modes that have a TC mode must have a resistance lock. But in some models, manufacturers do not ask to lock the resistanc, because this is done automatically when installing a new atomizer (did you see the question — new atomizer? Yes / No)
Я должен объяснить, что эта фраза не относилась к ДНК модам. Я не правильно понял суть дискуссии
-
Я не могу найти ссылку, но поймите, блокировка холодного сопротивления нужна при точной отстройке сопротивления (выравнивание отклонений в материале от табличных), людям. которые вполне довольны дефолтной прошивкой и точностью измерения сопротивления до сотых, использовать блокировку сопротивления нельзя- у них может произойти перегрузка головного мозга. Подстройка сопротивления спирали вручную это как изменение холодного сопротивления по одной десятитысячной ома. так и ручное изменение настроек комнатной температуры-вот здесь и важна блокировка сопротивления.
Такое ощущение что вопрос блокировки сопротивления стал настолько решающим, что этот пост растянулся на километр
Закрывая дискуссию мне легче сказать: "Все что я писал это неправда, я все это придумал, а вейп я вообще в руках не держал"
-
7 минут назад, Lanzarotechris сказал:
But please stop bullying and maybe use your translator to check the forum rules again ?
Well, I give up, you are a genius, vape god. Just try to manually change the room temperature on an unlocked resistance. Goodbye I'm not interested with you.
-
3 минуты назад, Lanzarotechris сказал:
BTW: What is you native language ?
Русский
-
11 минуту назад, Lanzarotechris сказал:
Please do not confuse the people you try to help by using words that have a different meaning.
I have already said that I do not know English, I did not correctly understand the meaning of many concepts on the forum. But in your comments, I see that you do not fully possess information about TC mode.
P. S.
When I say "lock", then I refer to the "lock ohm" function.
-
8 минут назад, Wayneo сказал:
ust to clear up a bit of confusion, whenever I've typed "mods" I'm referring to the volunteers in this forum, and nothing else as we really only discuss DNAs here.
Sorry, I have some translation difficulties.
-
9 минут назад, Wayneo сказал:
What other mods recommend that you lock? And where?
All modes that have a TC mode must have a resistance lock. But in some models, manufacturers do not ask to lock the resistanc, because this is done automatically when installing a new atomizer (did you see the question — new atomizer? Yes / No). When you confirm a new atomizer, the mod remembers and locks cold resistance.
-
We learn this in school. These are the basic principles of Ohm's laws ...Look here, but it's hard for me to judge the quality of this information, because I don't know English
-
1
-
-
1 час назад, Lanzarotechris сказал:
So you say all TC materials (SS, TI and NI) should be locked by default because they change resistance when heated ?
Thats new to me... never heared that anywhere. Do you have a source for that ?
The change in resistance during heating is the main condition for temperature control material. The fixed cold resistance is the starting point for calculating the temperature of the coil when the mode is TC mode operating. In Watts mode, it calculates the coil power from the cold resistance, if it is fixed or from the live resistance, so without locking the resistance (using a thermocontrol coil), the power values may differ from the given values. I apologize for breaking English, I am writing with the help of a translator
P. S.
To quote Orwell it was necessary to be born in the USSR, and before repeating Einstein, make sure that he did not speak about you.
-
1
-
1
-
-
Проверь может в самом Escribe на вкладке Safety выключена настройка пароля
Check can in the Escribe on the Safety tab off the password setting
-
In order to get an answer to the question why an Ohm lock, you need to understand the difference between thermal control materials and non-thermal control materials. Thermocontrol materials significantly change the resistance when heated, so for such materials it is desirable to lock cold resistance in any mode of operation.
-
1
-
-
if in the replay mode the thermocontrol material is used then the resistance blocking is needed, if the watts are used then the blocking does not make sense. Try to set the theme of frenk65 or mine, in them, if you change the resistance, you can block the cold resistance
-
1
-
-
done in 4 minutes, you need detailed information about what you want
-
What is this style?
-
yes, this is triade 250c
-
Before installing, do not forget to save your profile
-
Try setting this setting and see how the batteries behave. On the USB and Battery screens a lot of information
-
My test lasted 5 hours. After the test, battery performance increased by 40%. You have battery problem or modular charging. The DNA first charges the battery to full charge, and then the discharge begins.
-
-
-
Save your settings in Escribe so that you can bring it back and try to install it. Attention, CRV battery for samsung 30q -
I renewed
-
I am interested only in the opinion of Russian-speaking users. The English version is here. if you can give feedback on the quality of translation
-
Господа, я выложил русифицированную тему здесь. Мне просто интересно, это реально никого не интересует? Или просто лень написать отзывы (лучше критику). Или просто русский не рулит?
Интересно послушать, что думают другие.
my battery indikator empty, but i can firing
in Installation and Assembly
Posted
For the answer, I need to study the theme installed on your finder and probably the settings file escribe.
If you want to send me files, I'll try to help.