steam666

Hi all, it is probably the wrong thread here, but I'm facing a very similar issue with a DNA60 and it would be interesting to see if the failure is cross-platform. I have the same issue that every now and then it will not boot (by pressing a button) from deep sleep or if I replace the battery. If I plug into USB it always starts up. I could narrow down the failure and in my case it is temperature related > if I use it in a slightly higher ambient temperature (means approx. 25-30ºC) it works as it should as long it does not go into deep sleep or the power supply is interrupted (e.g. replacing the battery)...but if I put it into the fridge, or place it in front of the AC in my car for a while it boots and works without any issues again. I set the max. temperature value to 85ºC in the software and monitored the board temperature during vaping to exclude a shutdown by the software, but I'm just vaping around 20W and the measured temperatures were far away from overheating. My question is if somebody of you can confirm the same behavior(?)...rather if you had to put your mod into the fridge to vape on ;-) Best regards