Jump to content

schnitzel

Members
  • Posts

    10
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

schnitzel's Achievements

Member

Member (2/3)

1

Reputation

  1. Bad contacts affect replayability as well. If your leads are not screwed tight or the 510 pin is somewhat loose the field will stay blank. Don't know if that's the case with your atty but it's something you can check.
  2. If you don't explicitly want to dig into the theme designer you can just go to the "theme" tab in escribe, select the "default theme" (button on the right) and then "upload settings", this will give you a theme that can do replay.
  3. I don't know how others use profiles but I have a profile for each atomizer I use. In theory there could be an option "tie atomizer to profile" so the system knows (or can assume) it's still the same atomizer. It means you'd have to change the profile every time you put on a different atomizer but I'm doing that now and it doesn't really happen that often. Not sure if that makes sense
  4. I doubt it, but maybe my jiggerypoking skills need an upgrade as well. I looked at several 250c themes and tried to reproduce the Replay screen in the default Lost Vape 75c theme (I believe it's Daniel's theme) to no avail. A random 250c theme I tried didn't work (replay was "off" and couldn't turn it on), another 250c theme worked when I installed it (the one from dna200.de German site) but the default one is a bit simpler to use so I'm with that atm. I'm not very good with the theme designer though so I don't rule out someone else having more luck with it.
  5. For those with theme problems, go to this post from above There's 2 major steps for getting replay on your 75c 1. firmware upgrade 2. replay enabled theme upload (the default theme will do, some 250c themes may work as well) If you have done that and enabled replay in at least one profile you're good to go (don't forget to use a temp-compatible coil material or it won't let you use replay)
  6. You have to be in developer mode I believe. In the menubar you go to "Help"->"About Escribe" and then click on the evolv logo until the window closes. Now you're in developer mode and in addition to "viable coils" and "dubious coils" you now have "unlikely coils" in the mod tab and in the profiles you have a new checkbox for PK under the Replay checkbox (you need both). Here's a vid from a German guy showing how to do it (the language isn't important, he shows what to do on screen anyways)
  7. Thanks a lot, the default theme did it, was a bit easier than I imagined
  8. I didn't use the Theme Designer much so far so no real idea of how to show the replay controls. Are you saying it's possible to use replay without fumbling around in the TD or did you do something? If it's not too complicated would you be willing to share? Edit: just for information - yes I activated Replay for profile 8 and uploaded the settings to the device. It's doing normal TC in that profile though atm, not Replay.
  9. Just wanted to express my gratitude for a Linux version of the software, it's very much appreciated.
  10. Apparently the software needs to be tailored to the device and work is in progress, that's rarely a quick process and after finishing the final version still needs to be tested before release. Just be patient. If they could release it they would, what better advertisement for Evolv/Replay could there be than all 75c users having it on their device and talking about it? If I understood it correctly Evolv are also working on their own devices soon to be released so they're not only focused on the 75c firmware and I bet it doesn't have the highest priority. I don't know why so many rolls of tinfoil are used and nefarious intent be insinuated... they don't gain anything from artificially holding the update back.
×
×
  • Create New...