meloserj
-
Posts
11 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Posts posted by meloserj
-
-
@Wayneo I was exactly waiting for your comment. Because after taking screen shot, I looked to profile and then I changed it to profile number 2 and there again I run atomizer analyzer. The same issue observed. So I don’t think this would be a profile change and analyzer issue. Issue still persist and as you can see from device monitor, cold ohms are unusual.
-
-
9 minutes ago, Wayneo said:
That fluctuation is too great. Normally I'd suggest checking your build connections first, BUT seeing as how the 200/250 show .15Ω, now I'd suggest you check the length of the 510 pin on your atty compared to the mods 510 depth. Have you tried any other atty's with a longer 510 pin?
Changing themes aren't gonna accomplish SFA. Atomizer Analyzer shows the truth.
Hi @Wayneo
Yes I did try different atty. The same build on SC V2 plus and SC Ragnar installed (Dual 6 wraps of 26*3/36 in 3.5 mm Ni80 Fused clapton) and those atty's have different 510 leg length. No changes has seen. But DNA200/250 show exactly the same cold ohms. I even tried to check the 510 connector center pin and wires to DNA250C board, checked for cold soldering, but everything seems ok.
-
Hi @BillW50
Atomizer analyzer saying 0.21 until 0.24 which is fluctuating and never stopped accurate. But as I told before, the device monitor shows live ohms accurately and cold ohm much higher.
I was using mod stock theme, i even changed it yesterday to Gauges theme but no changes. I will update to Frank65 theme (hope to find it in download section) and will update you.
-
Hello mates
Just got my new Hadron Pro, before doing any SP upgrade, I realized that the cold ohm showing on main theme screen is 0.72. I fully charged my mod and then connect my atty with 0.15 ohm (sure about it as its shows the same on DNA200/DNA250). Hadron Pro prompted for new coil and I selected YES, but ohm now is showing 0.22 in cold situation (Nichrome dual fused clapton) I connected to Escribe and even device monitor shows the same. But when I fire Mod, it jumps to 0.156 which is correct.
Then I updated the SP to 45 and still the same problem existed. Even on youtube, I can see the same wrong ohm showing (for example below review after 15 min timeline), so I wanna ask if this is normal? How I can know if chip is faulty or not?
Thanks a lot for your kind help
)
-
This is exactly what I am getting! OMG, I was thinking I am the stupid one who doesn't understand ohm laws !
Thanks a lot to share this photo and I will wait for update of DNA200 -
Wayneo said:
@meloserj I already sent him a message when I saw post#127, and with no response it slipped my mind. No worries, here's what I had on my machine. Unfortunately Jaquith isn't here to explain the differences, or the missing versions. Use at your own discretion. Oh, one last thing, when you look at the filenames, the UD portion I believe was vendor specific, and I've got one other without the UD. I have no idea so use whichever you'd like based on his comments above. Cheers.
Thanks bro, yes the UD is vendor name ( http://www.yourcig.com/ )
Thanks a lot for sharing the files -
Jaquith said:
Easy enough, here's version 3.5; it's lower temps are unchanged, but the higher temps are an average of V3 and V4 .. hence V3.5 - http://www.filedropper.com/dna200-ud-ss316ldjaquithv35
In addition, V3.25 is an average of V3 and V3.5 at the higher temps - http://www.filedropper.com/dna200-ud-ss316ldjaquithv325
Let me know! BTW on SS I try to keep the preheat between 2-3; I'm using a 1.9 at 0.5 seconds with a 120% of the set wattage.
Files removed from filedropper bro. may you please upload them again? @Jaquith -
@Wayneo May you please send files again? Links are not working
-
Hello mates
I am new to TC mode, and I have a question regarding the best setting for my Wismec DNA200 mod.
Currently I purchased MKWS 316L Stainless Steel with 24 AWG coils, on my Griffin25 I made dual coils and resistance is 0.12 ohms.
I downloaded SS136 /Elite from steam engine and it gives me poor vapor.
So I searches and downloaded a CSV file which is attached. I am not sure if its ok or not.
My config is 40W with 80W preheat at 4.9 for 1s at 450F.
May someone instruct me what shall I set correctly to have big clouds and enjoyable vape on this device for the mentioned coils? I mean all wattage and preheat parameters and temperature with correct CSV.
Any kind help is highly appreciated.
Hadron Pro cold ohm wrong - weak spring
in General Discussion
Posted
@BillW50 @dwcraig1
Hi mates
Issue resolved. I dismantled the board from enclosure and took out the 510. The spring of 510 was not what I expected in quality, so I replaced it with my extra Source V3 M10 510 Connector spring. Now mod is working without any issue.
Thanks a lot for your kind suggestions