Canadianvape
-
Posts
60 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by Canadianvape
-
-
Preset 5 should be power dominant by default, just change material if you are using TC.
-
That is a temperature dominant profile, uncheck the box. I like having 4 and 4,
-
4 hours ago, Wayneo said:
Read my prior post.
Thanks, had to re read it as some of the technical content was being a bit hazy. I'm gonna go with 0.0032, unless anyone can provide the actual 4th point
-
On 2017-06-27 at 1:20 PM, Wayneo said:
I guess that must've been the wrong link, only showing the wire. In another thread it's mentioned to subtract the cold ohm value (.142) from the raw ohm value (.145), leaving a .003 which matches the copper plug. Sorry 'bout that.
So 0.007 or 0.003?
-
Thanks, I've been looking for this information for 12hours, most appreciated
-
-
Ordered yellow VT250s for Father's Day, should be here in 1-2 weeks
- 1
-
Happens with sdna75 aswell, reset to factory default temporarily fixed mine, don't got a clue on what causes it so I moved back to the 200.
Ed: on another note it has no problem doing NICHROME temp control, nickel is tricky (have to constantly move the liquid control on Kay v5) 317l on ice3 works fine, at least it's not just only mine. Companies should really remove the "can't use nichrome" since it's actually in the limit range.
-
On 2017-05-30 at 9:23 AM, Swerved said:
Strange. I'll definitely be paying close attention to mine in the future but so far I've been issue-free with the exception of something I did.. On a few occasions I had to resort to a factory reset and start over.
Factory reset seems to have worked for now, thank you, I do not know if it will last though.
-
3 hours ago, Swerved said:
Strange. I'll definitely be paying close attention to mine in the future but so far I've been issue-free with the exception of something I did.. On a few occasions I had to resort to a factory reset and start over.
Ive tried factory reset and placing the new firmware, it works fine with nickel, haven't tried titanium since I don't like it personally, worked with rda then it has to cool for 10 secs to use tc again either it marks it at 400c+ and 1w or turns off both with ss316l and 317l, I'm just gonna hope for a new firmware update that fixes it... it's almost a year since last so hopefully evolv has collected enough data on the dna75 through EScribe to fix it.
-
On 2017-05-28 at 8:33 AM, Swerved said:
Yeah that's kind of strange. You're not the only one I've seen with that issue... I wish I had a suggestion for you but I'm puzzled too.
***Edit: Just saw your post above... Ground screws eh? Who'd have thunk it? Glad ya got it worked out!
It worked for a day, this morning the vcmt with ss316l is playing funny again, the tc is off after first puff, doesn't work for another 5 puffs then works again, no problems when using ice3 rda... same tanks and rta that won't do ss tc on 75 work fine on the 200...
-
-
4 hours ago, Swerved said:
It might be the 510 and/or wiring on my 75 then, it now turns tc ss316l off, works fine on the 200 though, got no idea how to fix it since I don't know what is broken. It does nickel fine, just not ss...
-
-
On 2016-11-28 at 8:43 AM, Lance said:
Just a bit of a enquiry.
Just ordered a Triade DNA250 and bought some Samsung 30Q will they be ok with this device?
Thanks
Lance30Q is 15A CDC, to fire dna250 it requires 28a cdc 32a pulse (like 60/75/75c) so 97% means you have to buy lg hb6 (1500mha 30cdc) that is what is keeping me off the 250, already annoying that I got cornered to vtc4 on DNA200
-
I'm confused, should I update to sp2? I have a dna200/75, or is 2.0 only for 75C?
-
The dna75 can't get accurate consistent readings, the dna200 I find I don't have to lock, but given that vtc4 can't give me 200w at 10.5v and the voltage drop of 1v when fully charged, ill wait till next Black Friday/cyber Monday sale, VTC5 won't do past 50-55w once it's under 3.7v (on dna75)
i might buy the hgicar 2/3 250, but that would depend if battery producers can make a high capacity 30 a CDC batería,
i ask in stores and them buy from china themselves, I use site I got recommended and PayPal for insurance (no fakes to date) but I really don't think that they rate them right vtc5 says 30cdc 60 pulse sounds invented but batería is original.
I would had liked if the amperage being taken from batería would stay same as dna200 (23-24).
i do not want to be cornered to hb6....
on one other thing, anyone know why I use 277c on dna75 and 237c in DNA 200 same tank same resistance...?
-
Well my releaux dna200 came with overtightened frnt plate and maged to get all cells to male conection the sing cotton as shrry fron wismec blatantlt.lied and offered me amd rx chip mod and an atty for mine when they sold me the releauz dna200. And a prwvipi smfor ae mod painted bronze still dna200 in wismwc main site and they cant fix a dam. Tray!? They want to keep the dna200 pf.coirse i put sone cotton and. Batteries are making connection.. the sp5a has some qeird way of keeping the cells balaced dischargw but does.tje.job Not pulin all power of.cell 1 anymore.now thwu dicharge.weirdly in monitpr but even if u dont let it charge a cell and chaIn vape then it turns wven so i guess its the charging. Really angry thay wismec wpupd so bpatanrly lied i provided proof and got 3 different rx offer and Sherry lying sayong they dont produce it?! Gosh. Last wismec product i ever buy and they are NOT getting my releaux dna200 paint it bronze and sepl for more... dont know what conpany to trust to buy a dna250 or shouod i buy the chip myself?
-
Is there a way to get instant temp? Ive only trid different tyoes of ss but seeing as thereisno minimum resistance i could make a.2ohm dual ni200coil. Notxhcoils use nickel to conect barrel to terminals is that why? I got some demonkiller notch but the vapor prodiction was too much.
-
Got tc kanthal working? I noticed it reads atomizer to .0000 so it should be able to do it.. just need someone to make a cvs for escribe dna devices...
-
Thsre was an update past thw 2016-06-05?! I have that on Sdna75 and 1.2sp5 on dna200. Im kinda waiting to see what users say a put the 250. As the 200 is good unless they added a lot of new stiff as i see the 75 monitor lacking conpared to dna200 so there is less componemta mostly voltage from usb amps and per cell monitoring accuracy seems about same but a bit better on 200 dunno if i need the extra 50w. unless there more than jusy a bigger fuse but i dont know anyone locally with dna250 and vaping got demonized in vancouver, sure its tdp free but shops now look like adult shops.ChunkyButt200 said:the SP updates are for the 200/250 boards. there hasn't been a FW update for the 75 board yet (excluding the small "weak battery" update) .
-
I got issues on cell 1 on the releaux dna200... bit of cotton behind cells fixed it, use device monitor and make sure all your cells are making contact
-
250 only or 200/75 aswell? I got told jan 28 chinesse sites are holding high sales so im thinking of which one to order then. I watched djslvapes tutorial and he tells you to lock resistance on dna75Wayneo said:Not only fine, but on the approved Battery list from Mooch. Enjoy your device. While waiting, go watch a couple videos on Escribe. PBusardo has at least one. Mind you, there are minor changes because of the latest software, but nothing really drastic or noticeable. Big difference about these DNAs is that you should NOT lock your resistance.
-
Override ohms? Use ohm meter and use that value at 70f. Should work.
"Off" message in temperature control when firing Therion DNA 75
in General Discussion
Posted
Happens with sdna75 aswell, reset to factory default temporarily fixed mine, don't got a clue on what causes it so I moved back to the 200.
edit: changed the FW to the first version and resistance to 0, after reading it worked for someone, it's working now.