lewisss

Now I know there is not an option on escribe to set battery as a power supply. but is there any way to use this chip as a passthrough , with a plug in power supply. quite happy to solder,/make up circuit for this thanks in advance

bit of an odd one here ,i know this is an old chip DNA 200 40k+ puffs but this week it has stopped charging. on the device monitor it shows .5 amp (computer) but what ever level the batttery is initially it balances the cells and then stays at that level. here are 10minutes of the device monitor, and you can see after the puff it balances to 3.86 per cell then stays at that level. i can come back in an hour and it will be the same. it is a 2200 mah 3s lipo, and the lipo charges fine on a lipo charger. what happens when you plug the mod into a wall wart? i can see that USB current is being drawn from the computer, it has to be going somewhere. if you leave it sit for a few hours on wall wart the pack voltage will not go past 3.86v? does the mod get very warm or hot during the charge cycle? are you positive you have a solid main +/- battery connection to the board? if you have a DMM you can see if the pack voltage rises when you plug a 1a USB wall wart into mod. with a 1 amp charger, the pack voltage should rise a tiny bit as soon as you plug the USB in. last course of action is to contact the vendor you purchased the mod from or contact Evolv directly, through a help ticket. https://helpdesk.evolvapor.com/index.php?a=add

i have a dna 250 with a 400mah battery turnigy graphene but it is a bit of a monster

that's my issue really, does the '?' indicate 0 ohms (perfect short) or infinite ohms (when no atty is attached) there should be no circuit when no atty attached. if the' ?' is infinite ohms that means i am getting a break in the 510 circuit when i screw it in too far

no i didnt change anything. that must have been the default

what a dumbarse.. it was set to wait till usb current rises to 0.1 all working now thanks

I have built loads of dna devices and i measure the mod resistance with a solid copper threaded knob from signature mods. i always get mod resistance between 0.005-0.002 ohms I have just done my first dna250 (massive with a turnigy 4000mah 3s2p graphene lipo) and it reads the resistance as i screw it on like normal but when it makes good contact it shows? does this mean there is 0 resistance in the mod? is this even possible?

just tried it again with 300mm anker cable (seriously over engineered) and same result error reads Please do a battery test wit a usb current of at least 0.9 Amperes Use a powered USB hub i necessary strange thing is, if i uncheck the battery test I still get the same result

weird, my vt200 has just done the same! it has had 49000 puffs mind you! mine has the lightning bolt but is only charging at 0.15A

Hi, I am trying to set up our first dna250 before we start releasing them. but we cant get the production utility to work. it keeps coming up th.t we need to use a powered usb and it needs at least 0.9a charge. I have it plugged in now to the hum we do the test through and it is charging at 1.85a we have tried both sp3 and 4 and it is the same issue with both thanks

dont worry i have found it ------------------------------ dumbarse

Hi, I am missing the production facility on SP3 and SP4 I have to go back to 2016-02-29 to get it. is this a known issue. Thanks in advance

Hi, I have the dna75 chip and want to make a mod with 2 parallel batteries to get a better usage time. But with this brings up two issues. 1. Putting batteries in parallel keeps the voltage the same but doubles the current. So with this in mind do I need to increase the wire gauge for the battery connections? 2. Will it be safe to charge the dna75 batteries via USB considering they will not be balanced. Thanks in advance.

Here's mine with a matching atty stand and spare 18650 case

Not going to apologise for putting this post on here, i know it has nothing directly to do with evolv or the dna chips but for the future of vaping please sign this petition, it is possibly the most important petition we have had yet regarding e cigarettes in the UK. and if the UK sets a precedent maybe that will help the case against the fda. main article is here link petition is here Link thanks for looking