Damob9k

Hi ChunkyB, My batteries are pretty low at the moment, 11%, but on idle they both show 3.33 When i press the fire button and get the "Check Battery" error the voltages for both cells drops to 3.12 briefly then back up to 3.23 then in a jaggered fashion back to 3.33. But I do get this error with fully charged batteries as well, actually all the time regardless of what batteries and charge state. I'll swap the batteries later and do a test and screen dump if that helps ? Many thanks Damian Just changed my batteries, then plugged the Therion into my USB cable, then had a thought ... does it come up with the error when the EScribe software is not even loaded ... answer YES ! So it has nothing to do with the software, must be hardware related ?

Hi dwcraig1, No, but I'm using two different cables, 1 at work and 1 at home which is a very high quality one i bought not too long ago. I will try another cable later when I'm back at home. Also as an aside, I'm using the USB2 ports that go directly into the motherboard on the back of my PC, and not USB3 ports as I have experienced issues before with plugging certain devices into them. Cheers Damian

Hi Wayneo, Sorry , yes it's dual coil. And yes to the other questions. I tried it again this morning before going to work, switched the profile on the Mod to my Snapdragon prof, now it's doing something different .. when I fire it, it's now saying Temperature Protected, even if I put the temp up to max 300c ? Also I noticed that the resistance has gone up to 0.25ohms. I don't have the snapdragon with me now as I only use it when at home. I'll do a screen capture on Device Monitor tonight. Cheers Damian BTW I'm having issues with the Device Monitor, as you may have spotted in my other post, ChuckyButt200 is currently doing His/her ? best to help me with that, so it may be a bit tricky to give you the necessary data but i'll give it a go !

Hello all, I'm new to DNA's but have been using TC on my now superseded IPV4s and Cuboid 150, using Titanium. But I thought i'd give SS a go seems as I had read that it's easier to use, so I bought a reel of 316L .50 (24awg) from StealthVape. I also bought a UD coil jig a few weeks ago, but couldn't use it with the twisted titanium wire I was making as it is too springy ! so thought - lets give SS + jig a go Have to say, they're the best looking coils i've ever made 2.5mm 7 wraps coming out at 0.18 (so says my Therion) Anyway .. I can't get it to work ! I have downloaded the Steam Engine csv for 316L and also 2 or 3 from here, but when i fire it off, it says OFF on the screen, also (when I can get it to work) the device monitor is showing nothing on the "Temp" reading ? All of the settings are correct as far as i know, and it was working fine on the atty (Snapdragon) before, so all i've really changed is the physical coil build and changed the coil material in EScribe. As i'm new to SS builds, is there something really basic i'm missing here ? I've looked around on these forums and the wider internet but can't see anything really specific about setting up SS coils. Any help and advice greatly received Many thanks Damian To add: I just switched the profile to my Goblin one, which is Titanium, and it works correctly, so it seems to be specifically the SS profile that is not working in temp mode.

Hi All, I have just bought my first DNA device - A LV Therion 166, after having another cheap mod start to go iffy ! ... love the Therion First (of many) silly questions : When I try to use the device monitor, and fire the mod, I get a "Check Battery" message on the mod screen. If I re-press the fire button another 2 times, it then fires correctly and I can see and monitor what it is doing. This happens on both computers I have Escribe installed on, both are Win 10. As far as I know i'm using the latest version : 1.2 SP5.2 I've seen this mentioned on this forum, but there was no solution given. For clarity, when it's unplugged it never gives this error. Any ideas ? Many thanks Damian