Willy
-
Posts
91 -
Joined
-
Last visited
-
Days Won
3
Content Type
Profiles
Forums
Downloads
Posts posted by Willy
-
-
Hello James,
Can you please put back the ability to manually enter the coil ohms setting when in "Ohm's Locked"? (Screen cap pic attached) I am forced to go back to an older version of Escribe to have this ability and I rather not do that.
Thank You Sir!
-
2
-
-
How about a ZNA 60! Took a new old stock ZNA clone, installed the 60, drilled a hole in the bottom for a USB post, wired it up for Escribe access w/o charging. I also upgraded that darn crappy screw adjustable 510 by drilling out the top cap so I can drop the 510 in and lock it down with a set screw from the side, I used one of the VariTube V1 510's, they have always worked well for me. I have three more of these new old stock ZNA clones on my bench but I don't know if I want to build any more of them.
I also put a 60 with the data/charge board in one of the Hana V4 mods. Don't have any pics of mine which is the same blue as John la's above, these pics are just some I grabbed off the net to give you and idea what the V4 looks like. I have one more of these waiting on my bench for another 60 build. Bought a pair of them that were new old stock, there was a fellow (zbbmods) on ebay who was selling left over stock from Hana after they closed their doors. I really like this tiny and light V4, and it really works well.
-
5
-
-
I replied over there, I appreciate the link to that one http://www.modmaker.co.uk/DNA75C-DNA250C-Cutout-Guide but it won't print to scale.
-
Anyone know of a template I can download and print for the 75C's and the 200C's? Like the one that was made for the 200 some time ago.
-
19 minutes ago, WickedJack said:
Will do thank you I didn't even notice I wasn't using the current version.
I've been trying to pop the carbon fiber off but I swear they used some kind of new not from this world bonding material, I've bent my spudger and 2 small screwdrivers already lol
Time to bust out the old ladies hair dryer lol wish I had a heatgun !!
A lot of good stuff came out of Roswell LoL. Good luck!
-
2
-
-
51 minutes ago, WickedJack said:
Yep ! Here you go
Let me know if you would like anything else checked off
Thank You
EDIT: These are the only 2 things that were already checked when I opened Escribe. I'm still figuring out how to use it obviously but if I may ask what is the option under Tool/Diagnostics, Perform USB Recovery Charging ? What does this do..?
Your screen shot shows the screen disconnected 163 times, likely the power button has pinched the flat screen cable. Below is a screen shot of one of mine, I used the windows "paint" program to point out the screen disconnect.
-
40 minutes ago, ChunkyButt200 said:
1.) Yes you can use the non data 1 amp micro USB charging board. As you said, using this charger will render the DNA 60 sans EScribe.
2.)Yes you can the ANY of the 128x32 OLED's (Do your spare OLED's have the red or green pull screen protector tab? I ask because the red tab'd screens are the most recent screens and are compatible with the 60, 75, 200 and 250 but not the 40. The old green tab'd screens (i think) work with the 40, 60, 75, 200 and 250.)
Any other question feel free to ask.
Thank you! I wasn't sure if the 60 board had any role in charging other then monitoring, I was pretty sure it didn't being a separate board but wasn't sure. I know some of the screens I have are the green tabs, may be a couple reds in the mix but most I've had for some time, I'll make a note of that for reference, thanks again!
-
Couple questions I need answered before I do a 60 install, I'm in the process of swapping out a DNA 40D board and upgrading to a 60 in a Hana V4S today. Yeah I know, nothing like waiting to the last second to ask questions....
1. Can I use the prior 1AMP Evolv charge board, wired to the 60, to charge the 18650 battery? I'm talking about the charge board without escribe capabilities being sold prior to the 60 release, I realize I won't have escribe.
2. The 60's I have came as small screen, I need a large screen. I have spare 200 screens, can I use one of those with the 60? I know I'd have to upload the correct large screen firmware to the board.
I was going to use the existing 40D screen, but last night I happen to see on the Evolv 60 sales page, under the spare screen description it says; NOTE: This screen is NOT compatible with the DNA 40. So I assume the 40 screen also won't work with the 60 https://www.evolvapor.com/products/dna60
Thanks!
-
8 minutes ago, truckman said:
Hello. Today I bought a paranormal. I connected to the computer and through escribe I made some basic settings and uploaded them to the device. So far all good. A little while ago I wanted to do some more, refuses to upload the escribe, and for anything I try to upload to my paranormal it makes the message "falled to upload settings". Why is this happening? what does not go well?
Try other USB ports and other USB cables, I have a drawer of cables that will still charge but stopped working with data connection. I've tried expensive and cheap cables, doesn't seem to matter, it's hit or miss how long they'll last. Now I keep a couple new cables on hand so I'm not stuck without one that works.
-
1
-
-
1 hour ago, ozadr1an said:
Judging by no one else having commented, it must be my end.. but Windows Defender just spat the dummy about ecigstats - I upgraded to the latest 2.0SP8 yesterday... :
I just updated the wife's Windows 10 computer the other day and read a article in the news paper about the new version MS released, it includes among other things, updated higher security. Expect more of these false flags with Defender until they iron some of them out, some I'm sure won't rise to the level that MS will invest the time to do anything about, how many of the populace use escribe? Maybe there is a way to dismiss the warning? The wife doesn't vape, I don't have escribe on her computer and I'm using Windows 7 on my desktop, I don't care for 10.
-
3 hours ago, spzjulien said:
sorry, im confuse, i need to connect my dna 60w without usb board to escribe too
i just need to solder 3 wire from board to usb and add 10k right ?
pin 13 USB DM USB data negative
pin 14 USB DP USB data positive
pin 15 USB Vdetect Connect to USB Vbus though a 10k ohm resistor if not using Evolv's charger boardsorry, im rookie and french
thanks for you help
edit : maybe need ground too ... ??
pin 12 Charger/USB - USB power negative
Yes that is the correct answer thanks to member ChunkButt200 who posted it here with pics. https://forum.evolvapor.com/topic/65550-dna-60/?do=findComment&comment=916132 I finally got around to finishing my ZNA 60 and this worked perfectly. I finally got around to finishing my ZNA 60 project and this worked perfectly. I drilled a hole in the base for the 510 then filled the gaps with some hot glue, trimmed the excess with a new x-acto blade and good to go. I also came up with a way to get rid of the crappy screw adjustable 510 and install a VariTube V1 510, not the mod is perfect.
-
2
-
-
1 minute ago, Lowbytes said:
Coil Face ID ;-) - You made my Day!
Beside this - w´d like to use the boost with slow heating coils - not for more power - a lot of people asking for Preheat !
Most of them using chinese mods with custom firmware - always the same question " i wonder why my cheap mod can preheat and the DNA not?" (Kanthal non TC)
Ah, preheat boost, sorry, I thought folks were looking to get more then 200 and 250 from the boards and I just can't see going even up to 200. I'm guilty of not reading all the posts.
-
Does anyone really use 250 watts?? Really?
-
Just now, dberry19k said:
I used electrical solder with a flux core that I got from hobby lobby
That's fine, you may already know this but the paste used for soldering copper pipes will work fine for a while but can ruin electronics over time, it's corrosive. Don't ask me how I know.......
-
1
-
-
dberry, I enlarged and enhanced one of your pics showing where you solder wires for the remote fire switch. I'd try to carefully clean this area between these two holes with some IPA and q-tips, make sure it isn't making a connection there. What did you use for soldering flux? Not soldering paste found in the plumbing dept at someplace like Lowes was it?
-
I know a few folks who, as I do in tc, set the watts much high then what we use and let the board control it. I have never had one of my dozen mods (60, 75 and 200's) fall out of tc and I haven't not heard of anyone else having one drop out, that's how damn good evolv boards work. They are the ONLY boards I'll use, I'll be a customer for life.
-
-
Dual 18650's, nice! Looks good!
I put one in a ZNA mod, I love those ZNA's, they feel good in my hand and make for a nice pocket mod when working around the house. It's still a work in progress mod, I replaced the crappy adjustable 510 with a VariTube V1 spring loaded 510, need to get some pics showing that. I've also got to do something different with the patch cable I made for connecting to the charge board so I can use escribe, I've started a thread looking for some answers on that in the modders section --> https://forum.evolvapor.com/topic/68792-can-i-bypass-the-charge-board-wire-a-usb-port-directly-to-board-for-escribe-no-charging-needed/
I'm very happy with the 60 so far, I'm getting just as good a vape as I do with my 75's and 200's.
-
7
-
-
I put a 60 board in a ZNA mod, there is not enough room in the mod for the charge board. I'm not looking to charge battery's in the mod, just want to be able to use escribe. Is it possible to wire a USB port directly to the 60 board for using escribe? For now I made a patch cable from a piece of an old IDE cable and JST balance connectors as found on lipo's, I can tuck it inside the mod when I don't need it. When I need to use escribe I can remove the battery tube, pull the patch cable out, re-install the battery and tube and use escribe. I was planning on making a better and permanent patch cable but I got thinking, if I can wire a USB port to the board I can make a slot for it and then be able to plug a USB cable directly to the mod.
Here's some pics of what I have now.
-
2
-
-
retird, Here's what I came up with, it will get me by until I come up with a better, permanent patch cable. I used a piece of an old IDE cable and the JST battery connectors, it just fits in that void above the screen you pointed out. I can pull it out, put the battery tube back on and run the mod with a 18650 while monitoring in escribe. Now I need to know, is there a way to shut charging off in escribe with the 60? I don't see it under Device Monitor, then under the Diagnostics button like you would with a 200 connected
-
2
-
-
4 hours ago, eucalyptus. said:
I also present an example of a connection.
I use old DNA 60.
It is the one when examining the board replacement for Clone Mod for testing.
I am sorry, Japanese.
The pictures speak all languages, good pictures, good job! Thank you for sharing sir!
-
20 hours ago, VapingBad said:
You know I love you Willy, but most of the world work in mm, so .020 without the unit specified , which we would assume is mm, seems a hell of a lot smaller than the 0.508 mm it is, though both very small.
My bad, my world is small, I forget this internet reaches world wide. It's an amazing thing to me, at my age I would have never dreamed where we are today. Back in the day most phone lines (longggg before cell phones) were shared party lines, there would be 3 or 4 of your neighbors on the same line, you were careful what you said because any of them could listen in. We've come a long way, younger folks must laugh at our stories of how things use to be.
VB, thank you brother.
-
1
-
-
4 hours ago, eucalyptus. said:
Hello.
For your information...
JST B2C Connector pitch variations.
SH : 1mm
ZH : 1.5mm
PH : 2mm
XH : 2.5mm
DNA60 USB Through-hole pitch : 0.08 in ( approx. 2mm ) = PH Connector!.
Ah damn it, so my 3 AM math was off, looks like .020 difference. I may still have a chance at making it work, bending the pins to align with the holes in the board isn't a problem, what may be a issue, the body of the JST won't sit flush with the board. I may have to go with another connector, well only one way to find out!
-
retired, I think I found a solution, if my 3 AM math is correct a 4S lipo battery balance (JST XH) connector will solder right to the 60 board in holes 11-15. https://www.digikey.com/product-detail/en/jst-sales-america-inc/B5B-XH-A(LF)(SN)/455-2270-ND/1530483
(SN).jpg.jpg.a3e5d20164dbbc68a371b1e46fff8129.jpg)
The pins on the JST are .010 closer together then the holes on the board but that's so minor I can bend them a tad so they will align. The body of the connector will fit in the Z and I'm pretty sure it will be low enough to clear the battery tube, if not I can trim it down, heck I could remove the body and just have the pins sticking out of the board. I ordered a cable from amazon that has both the male and female connectors, male to solder to the charge and female for the board. https://www.amazon.com/gp/product/B01N1GQ8KC
-
2
-
(SN).jpg.jpg.a3e5d20164dbbc68a371b1e46fff8129.jpg)
Please fix (put back) the ability to ability to manualy enter the coil ohms setting when in "Ohm's Locked" enter the coil ohms setting when in "Ohm's Locked"
in EScribe, Software and Firmware
Posted
Well, I somehow (??) FUBAR'd the title.... Sorry bout that folks!