Whatto

interested as well, happened the same with vapedroid C2D1 here...

I reuploaded the settings I had when I posted the graph (I received a new ecig file from Sbody in the meantime) and this is how it looks now. The behavior is different but the drop is still there, although now it does it much later (the graph is set to 360 seconds). The starting point of the Room temperature is complete bullshit, it si definitely not more than 20 degrees in the office right now

James, no it was doing the same regardless of the power level and it was the same on USB charger (from a laptop docking station) and on a regular 1A wall adapter. What I don't understand is that after Upload settings to device it was charging at 1A, after cca 45 seconds it gropped to cca 0.48A, and after another cca 45 seconds it fell to the erratic 0.2-ish A. After another Upload settings to Device the whole process repeated in a very similar manner (the graph scale is set to 180 seconds). Both drops to 0A represents the Upload settings to device

That is a bummer. I have C1D2 and C2D1 amd it seems somebody made a mistake. The single battery unit is depleting the batery all the time (although only started to do this after several weeks), the dual battery unit has issues with charging through USB and it only charges at arpund 0.2A and jumping around. I tried to connect it to 1A phone charger, and to a usb cable plugged into a docking station. Here it gets interesting. If the device is "idle" and charging, the USB current fluctuates around 0.2A. if i start escribe and with no changes i just Upload settings to device, it charges at 1A. But, after a while it falls again to around 0.2A... Seems like the small board is somehow malfunctioning, but i am not going to send it back to China...

guys @ Evolv, would it be possible to add Last Voltage for the display items? Last Max Voltage and Last Voltage would be great but the latter would be enough as well