[Lost Vape Therion DNA 75C]

26 minutes ago, niversonunger said:

Okay, thank you for getting back too me so quickly. Do you know of any forums or anything on here that might have the accurate  settings for the Therion  75c Squonker??

You can search around the forum; know this is a popular squonk mod. If you can’t find anything, keep the mod internal resistance at the factory setting if it came with one; if not, set to 0.0034; that’s 85% of .004, which is on par for all lost Vape mods that I’ve seen. 

You can then run a thermal analysis using Escribe;  very easy to do.

For battery profile, you can just use the Escribe default for an 18650.

[Lost Vape Therion DNA 75C]

15 minutes ago, niversonunger said:

Will these settings work with the Therion 75c Squonker?? 

Technically you could use these settings as a starting point. However, as the squonker is a different mod, the following settings should be changed:

internal mod resistance

mod thermal profile

battery profile for your specific batteries

[Lost Vape Mirage DNA 75C]

7 minutes ago, mactavish said:

Thanks for the SUPER quick response! I hope you will add the REPLAY feature when that becomes available. Hopefully by then I’ll be up to speed on editing profiles by then, and I won’t need to bother you anymore. As a new Mirage owner, I was surprised not to see more themes for it, yours seems to come up in a search here, as one if not the only one so far that is Mirage centric. Also other generic DNA75C themes don’t include the detailed notes yours does, which says a lot to me about your work. Thanks again. 

Absolutely! I have a new version of my DNA 75C Enhanced Default theme on standby ready to implement Replay; cannot wait for it to be released as it looks like a real game changer. Hopefully Evolv will have a beta up very soon.

Concerning the new mod, reminder that you can use any Theme that you want; there are some really great ones posted. This specific file is more about customized settings specific to the Mirage mod, and also happens to include my custom theme as that’s what I run on all of my 75C’s. 

[Lost Vape Mirage DNA 75C]

@mactavish

Congratulations on the new Mirage!

This posted EScribe settings file is already pre-configured to support 100W via the boost feature. You'll want to be sure to install EScribe International version v2.0 SP12 or higher, and apply beta firmware  v1.1 SP27 or higher to your new mod. You can then verify in EScribe under Mod, Safety, that the Max Output Power is set to 100W. 

Correct concerning batteries; if you're using a single 18650, you can either download a battery profile for your specific battery, or use the EScribe 18650 default. To use the default, go to the Mod, Battery tab. Under Type, change it to Lithium Polymer temporarily, then back to Lithium Ion 18650. That will wipe out the iJoy 21700 profile with the default 18650, and you're all set.

Concerning battery safety, be sure to set the Max Peak and Sustained Input Currents to the ratings for your specific 18650 battery. Don't want to draw 24A sustained if the battery isn't rated for it!

Hope you enjoy!

[Lost Vape Therion DNA 75C]

17 hours ago, Effintreyy said:

Will this work on my boxer 75c using single 20700 battery?

I wouldn't really recommend it; a different mod and battery will have differences in thermal profile, battery profile, internal resistance, etc. Would be better to configure the Boxer by hand using EScribe's case and battery analyzers.

[Evolv DNA 75C and 250C Enhanced Default Theme with Replay]

8 hours ago, Smokin Dave said:

Love the new theme but now the fire button light stays on until I click 5x to shut the mod off.Otherwise, it just stays on.Whats the fix for this?

@Smokin Dave This was actually intentional before I'd read posts about this causing extended battery drain. Version 1.9 just uploaded removes the LED staying on until the mod sleeps. This version is up and also includes other changes to the Performance screen. Check it out! 

[Evolv DNA 75C and 250C Enhanced Default Theme with Replay]

@67exec I'm assuming you're seeing this in the Profile field, above the wattage / temp+wattage fields on the main screen? Not exactly sure how this is possible, as that field is assigned to display the selected profile Name. and not coil material. Did you check your profiles in EScribe to ensure they're named properly? Check that when you get a chance, and maybe try applying the new v1.7 theme just uploaded and see if that helps.