DNA 250C Only Charging to 90%

[Buzzkiller]

Just built this mod,  brand new Turnigy 4S lipo, initially charged to 100% but after charging again, onboard USB charger cuts off at 90%. All cells balanced at 4.0V, total voltage is at 16.3V. I can't figure it out.

Edited January 26, 2023 by Buzzkiller

[dwcraig1]

You have it set for "maximum recharges" , that is how I set mine when using a LiPo.

If you want is to charge to 4.2 volts per cell set it to :maximum puffs.

Maximum recharges stops the charge at 4.1 volts.

[Buzzkiller]

Thank you kindly, sir. What a rookie mistake...jeez.