Lost Vape Cyborg with DNA 100C

[PT Hugo Oliveira]

Hello every one.

Excuse me for any miss speling, I´m from Portugal.

Question:

I have a cyborg with a Quest chip that doesn´t work. I had a briliant idea of buying a DNA 100c Chip and change the chip myself.

Is it possible to achive this? Did anyone ever tried this?

[Wayneo]

What is the distance in mm from the middle of the bottom actuator to the middle of the USB connector? on the cyborg

[PT Hugo Oliveira]

Hello Wayneo

The distance is 9mm between the center of o last button and the center of the type C port

[Wayneo]

That's the same distance as the 100C, so the buttons should line up. It might be tight in there.

Here's the drawing of the 100C if you want to check even more.

https://www.stealthvape.co.uk/product/evolv-dna100c/

Good luck.

 

[PT Hugo Oliveira]

I think I´ll give it a try.

Thanks Whyneo for your help. i´ll keep you posted when it´s done

[Wayneo]

2 hours ago, PT Hugo Oliveira said:

I think I´ll give it a try.

You should look through this datasheet and also pick up some silicone sheathed wire and jut rewire it completely. Ideally you have an electronics store nearby, or maybe even stealthvape. You'll only need a max of 4 wires about 6 inches of each (max)
https://downloads.evolvapor.com/dna75color.pdf
 

[xanderzone]

Hi Hugo

 

I see your Post here. 

Did you have make your Project possible ?

I did it and it works great.

Greetz Pascal