zombo Posted March 26, 2018 Report Posted March 26, 2018 I need some help figuring out where to ground this wire for the DNA 250 on a HANA MODZ DIY mod. Board and Mod Imgur Link Do I just wire the ground to the case, or to the silver part of the 510 that is screwed in to the case?
retird Posted March 27, 2018 Report Posted March 27, 2018 You could use the 3 mounting screws that hold the board in the enclosure as they are ground. Make sure that your 510 is tightly screwed into the enclosure as that will be the ground for the 510. OR you can run a ground wire from the power out ground solder pad to the shell (silver part) of the 510. Here is a data sheet that also has a wiring schematic and picture... https://downloads.evolvapor.com/dna250.pdf
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now