Vtc5 and therion166

[Jadegrsx]

Hey guys, so I have brand new vtc5s, downloaded someone’s vtc5 profile, and on my Therion166 I am getting check battery at 62%. Used to be more like 15, which even then I was baffled by 

edit: just turned down the boost to 4 from 11, and Its firing fine, but need the boost for these big triple Clapton’s in the tfv12 rba t. 

Edited March 5, 2018 by Jadegrsx

[Jadegrsx]

And now check battery again at 42%, what do I need to do? I don’t have the materials unfortunately to do atomizer test

[Jadegrsx]

Battery analyzer*

[Jadegrsx]

Nobody?!

[Jadegrsx]

Bump with 67 views

[VapingBad]

I don't know but if I were you would look at the battery sag in Device Monitor to get more of an insight, my guess is that they are sagging to the low cut-off, btw I would set this to 2.75 or 2.85 for cylindrical batteries.

[Jadegrsx]

I ran the anaylzer test using the open loop wire method, I'll let you know if it fixed it 

[Jadegrsx]

I ran the anaylzer test using the open loop wire method, I'll let you know if it fixed it 

 

Edit: after running the anaylzer my mod no longer says check batt at 60% yay