Therion DNA 75

[Draken]

Hi all. Ive just gotten my therion dna 75 mod . Im new to evolv chip and would like to ask the expert whats my next step to vape efficiently and maximize true potential of my mod? Im a noob on the escribe.

[Wayneo]

Straight 75, or 75 Color?

Go to file -> save as, and save a copy of the original configuration.

Check your mod is running the latest firmware.

Check out some YT video reviews

[Draken]

Straight dna75. Ive watched some YT vids. But am wondering whats the Batttery analyzer does? Also ive updated to the latest firmware.

[Wayneo]

Battery analyzer really just gives you an accurate estimation of how much your batteries are charged/discharged. Your mod will fire perfectly fine leaving it at default.

IMHO the cell soft cutoff is very important. The 75 has a hard cutoff of 2.5V UNDER LOAD (sag). I and many others use 2.7-2.9v with the lower value giving you slightly more run time before 'Check battery' warnings. With a single cell 75, I value Amperage over mAh. In a dual or more cell, I'll go with high mAh.

[Draken]

I am using the dual Sony VTC 5. Specs are as below. Do advice me should i change the number of the cell soft cutoff?

 

• Max. continuous discharge current: 20A
• Nominal capacity: 2500 mAh
• Nominal voltage: 3.6 V
• Discharge end voltage: 2.5 V
• Charging voltage: 4.20 +/- 0.05 V
• Standard charging current: 1.25 A

[Wayneo]

  On 6/15/2017 at 5:21 AM, Draken said:

Do advice me should i change the number of the cell soft cutoff?

Expand  

If you're not gonna read, I'm not gonna type

  On 6/15/2017 at 2:27 AM, Wayneo said:

cell soft cutoff is very important. ..... use 2.7-2.9v with the lower value giving you slightly more run time before

Expand