Taver13 Posted October 6, 2015 Author Report Posted October 6, 2015 day two of having my board installed. It charged fine yesterday. today, i plug it in, and it does not charge, it connects fine to escribe, but the lightning bolt does not appear. even connected to a wall adapter nothing. i opened my mod up and checked all my ballance connections, and all of them appear to be in good order, any thoughts?
scoopy Posted October 6, 2015 Report Posted October 6, 2015 Double check all your solder connections again on the balance tap....that's usually the culprit......or clean them with alcohol on a q tip......With the battery off of course lol......I had a little corrosion in between them before I'm guessing from not cleaning the flux off after soldering and that caused me weird problem's. ....If u can't figure it out it wouldn't hurt to reflow all the solder points for the balance port........also check both sides of the board real close for missing or loose resistors
Taver13 Posted October 6, 2015 Author Report Posted October 6, 2015 going to double check again, thanks! i did, just to rule out any possible battery issues, connect to an external balance charger and everything there checks out ok. after another inspection, i will report any new findings
Havensal Posted October 6, 2015 Report Posted October 6, 2015 What does Escribe show for a status of each cell and total voltage?
Taver13 Posted October 6, 2015 Author Report Posted October 6, 2015 escribe is showing that i have 11.5 volts total.3.84/3.82/3.84 for each cell which matches what my external charger was showing me. yet, my screen is still showing less than 1/4th battery life and will not charge
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now