Profile OHMS inconsistency

[FireBALL]

I have setup two profiles for Ni200

profile 1 - 100w preheat - 50w otherwise - ohms 0 unlocked
profile 2 - 60w preheat - 35w otherwise - ohms 0 unlocked

rest of the things are same, (i have tried locked as well as unlocked for trouble shooting but results are the same)

DNA200 changes ohms when I switch profiles.  Coil is .1 ohms cold but profile 1 measures it as .12 and profile 2 reports .09

Don't know if it's a bug or both profiles do not want to play well.  all readings are at cold (room temperature 24C)

[blueridgedog]

Try it cold first thing in the starting without an atomizer attached.  Put on an atomizer and read ohms in p1 then p2.

[FireBALL]

blueridgedog said:

Try it cold first thing in the starting without an atomizer attached.  Put on an atomizer and read ohms in p1 then p2.

Will give it a try.

Thanx