mknight Posted August 29, 2015 Author Report Share Posted August 29, 2015 Dumb dumb dumb question guys and gals.I just got my first dna200 and I'm trying to learn the ins and outs of escribe. Ive asked around on some of the other forums; but, I'm not finding a clear answer to this. Is there a say to give it a preheat or a, boost type of function on power mode? I'm also trying to put In the tcr for ss.m Link to comment Share on other sites More sharing options...
scoopy Posted August 29, 2015 Report Share Posted August 29, 2015 Nope just with temp control Link to comment Share on other sites More sharing options...
Clay333 Posted September 13, 2015 Report Share Posted September 13, 2015 I really wish this was possible. It was my only let down with the 200. While watching reviews no one ever mentioned it, and I just assumed that preheat was preheat no matter what mode you were in. I do alot of "try hard" builds and some of them have a pretty high ramp up time. Sure I can just crank the wattage to get them to heat faster, but then when they get up to temp they are too hot. Please evolv add this feature! I, along with thousands of others, would absolutely love it. Link to comment Share on other sites More sharing options...
mknight Posted September 13, 2015 Author Report Share Posted September 13, 2015 AMEN!!!!!!! NOT having this feature is what is stopping me from buying another dna200. its the best vape I've had with TC; but, quite honestly not having that feature holds it back in comparison to mods that do have it with kanthal (sx350j...i know thats probably a cuss word here but that board does perform better in power mode because of the boost) even provape Incorporated a boost feature in the p3. some call the other company less accurate not as good or lacking something that the DNA has, but here I sit using SS in tc mode not because I love tc, but rather to get similar performance as my sx350j.its that rush of power at the beginning of the hit that I love! Would like to see the DNA be the end all be all of the modders boards but its almost like they forgot about poor little kanthalplease, make it happen and ill order another one now! Link to comment Share on other sites More sharing options...
vidalcris Posted September 14, 2015 Report Share Posted September 14, 2015 I agree ! I want a Kanthal boost too ! http://evolvapor.forumchitchat.com/post/preheat-kanthal-mode-7535528?pid=1288210185 Link to comment Share on other sites More sharing options...
mknight Posted September 22, 2015 Author Report Share Posted September 22, 2015 what happened to the other thread on this, there were some tips that I was still trying Link to comment Share on other sites More sharing options...
Brandon Posted September 22, 2015 Report Share Posted September 22, 2015 It got deleted by accident during the great Korean forum spammer rebellion of 2015. Sorry about that. Link to comment Share on other sites More sharing options...
mknight Posted September 22, 2015 Author Report Share Posted September 22, 2015 IBrandon said:It got deleted by accident during the great Korean forum spammer rebellion of 2015. Sorry about that.so it wasn't Klingon this morning? Link to comment Share on other sites More sharing options...
Brandon Posted September 22, 2015 Report Share Posted September 22, 2015 Unless the Klingons have been assimilated by the Korean's. Possible but unlikely. Link to comment Share on other sites More sharing options...
mknight Posted September 22, 2015 Author Report Share Posted September 22, 2015 Brandon said:Unless the Klingons have been assimilated by the Korean's. Possible but unlikely.well then they both suck Link to comment Share on other sites More sharing options...
Noixd Posted September 23, 2015 Report Share Posted September 23, 2015 GO KOREA!!!! Link to comment Share on other sites More sharing options...
mknight Posted September 28, 2015 Author Report Share Posted September 28, 2015 The klingons have been defeated..... Link to comment Share on other sites More sharing options...
BobC Posted September 28, 2015 Report Share Posted September 28, 2015 In getting back to the request at hand, wouldn't you need to be able to measure temperature to manage preheating?If you're not in Temperature mode, how do you see preheating working? Link to comment Share on other sites More sharing options...
mknight Posted September 28, 2015 Author Report Share Posted September 28, 2015 Not necessarily if it were just a power boost like the p3, sx350j, smok cube or evict. Let the first second or two seconds gave it 10-20% higher power than the set power output.I don't think any of us are referring to a temp preheat just a boost mode, imho it makes dripping on a regulated mod exponentially better. Link to comment Share on other sites More sharing options...
BobC Posted September 28, 2015 Report Share Posted September 28, 2015 So, some random initial boost. Curious, do you not like the TC wire options (NI,TI,SS etc) ? Link to comment Share on other sites More sharing options...
mknight Posted September 28, 2015 Author Report Share Posted September 28, 2015 I do. I use ss for tc and do really enjoy it, however, I do prefer working with Kanthal and I also really dripping with 22g Kanthal at a 0.18 on my hexohm, the same build can't get the same results on the DNA because 1- would have to use more wraps for the same surface are coverage (can't find anything bigger than 24g)2-theq RT would be too low to be safely employed3- a bigger coil to compensate for RT which would not leave much room for wick 4- the ramp up with Kanthal kills me5- I wouldn't think it would be that complicated for evolve to add the functionality and myself as well as others would thoroughly enjoy it and I didn't see an issue asking since we have the opportunity to do so 6- would love to get rid of my other mods and settle with one company. 7- ti tastes like licking a dirty diaper to me 8- I dont like working with nickel at all and believe me I've tried, I've been using a DNA 40 since the first run Link to comment Share on other sites More sharing options...
Mad Scientist Posted September 29, 2015 Report Share Posted September 29, 2015 At some point, I guess I don't see why there couldn't be a power profile curve similar to TCR curve and battery discharge curve. X axis is time and y axis is wattage. Enter the values and it fires following the entered power curve. Unfortunately, I think that would sort of negate the whole concept of the board. Non-TC wire support seems more of a legacy compromise. For me, I can't taste anything from any variety of wire I've tried. I use a build that balances cold resistance in the range that works with surface area for the vape I want using wire material with a sufficient TCR at vape temps. For now Ti is best at that. Link to comment Share on other sites More sharing options...
mknight Posted September 29, 2015 Author Report Share Posted September 29, 2015 Mad Scientist said:At some point, I guess I don't see why there couldn't be a power profile curve similar to TCR curve and battery discharge curve. X axis is time and y axis is wattage. Enter the values and it fires following the entered power curve. Unfortunately, I think that would sort of negate the whole concept of the board. Non-TC wire support seems more of a legacy compromise. For me, I can't taste anything from any variety of wire I've tried. I use a build that balances cold resistance in the range that works with surface area for the vape I want using wire material with a sufficient TCR at vape temps. For now Ti is best at that.And ti performance wise is great but I'm one of the few that get that terrible taste from it; and, that's trying 3 different vendors Link to comment Share on other sites More sharing options...
Dominicusx Posted January 10, 2016 Report Share Posted January 10, 2016 Just put kanthal in tcr and use preheat that way Link to comment Share on other sites More sharing options...
dwcraig1 Posted January 11, 2016 Report Share Posted January 11, 2016 Dominicusx said:Just put kanthal in tcr and use preheat that wayLOL, so nobody's going to admit trying this.......LOL Link to comment Share on other sites More sharing options...
digatel Posted January 13, 2016 Report Share Posted January 13, 2016 dwcraig1 said:[QUOTE=Dominicusx]Just put kanthal in tcr and use preheat that wayLOL, so nobody's going to admit trying this.......LOL[/QUOTE] In theory, it should work...right? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now